Availability of Trailer Hitch Receiver for 2025 Cedar Creek 381 MUD

Updated 02/23/2026 | Published 02/16/2026

Products Featured in This Question

Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide

(571)

$486.56

TowSmart Trailer Connector - 4-Wire Flat Set - 12" Trailer - 48" Vehicle

(3)

$11.70

Question:

Looking to install a hitch on back of 2025 Cedar Creek 381 MUD. I would like to tow motorcycle on small aluminum trailer behind 5th wheel or install 4 bike rack. Unit has frame storage in the back.

asked by: Chad

Expert Reply:

Hey Chad,

I tried to find some pictures of your 2025 Cedar Creek 381 MUD but could not find any that showed where a hitch would go, with that said the most common hitch we install on campers is the Curt # 13703. This hitch has a 350lb tongue weight rating, and a 3,500lb towing capacity. You will want to check with the trailer manufacturer to see what it is rated to tow.

As long as your frame is a box frame, C-channel frame, or I-beam frame and there's nothing in the way on the frame where the hitch would go this hitch would be just fine.

This should work for a bike rack as long as its rated for use on the back of a 5th wheel, and doesn't exceed the capacities of the hitch.

To tow though, you'll also need wiring. There's no great way to do this to be honest. You'll have to use a splice in harness like # TS46RR into the tail lights on your trailer to be able to light up the lights of the trailer you'll be towing.

What kind of motorcycle do you have?

expert reply by: Samuel C

Rick B.

2/20/2026

The trailer hitch works great on the back of my grand design 2500 RL. I carry 2E bikes on it whenever we are traveling and have had no problem with the hitch at all.

Samuel C.

2/23/2026

@RickB Glad to hear this hitch worked out for you! Thanks for sharing.

Ron C.

2/20/2026

Hi Chad I got the adjustable #13703 hitch for my 2022 palomino puma 26fkds last year. My trailer has the I beam frame and the hitch was fairly easy to install I bolted it up and did a little bit of welding just for added strength. The only modification I had to do was cut a little 1” notch under the rear bumper for the hitch to fit. I got the hitch for my new e bikes that are fairly heavy. I think the hitch is very heavy duty and it works great I am very satisfied.