Will Straight Axle Replace 4 inch Drop # e95SR
Updated 02/23/2026 | Published 02/14/2026
Products Featured in This Question
Question:
I installed two of these axels e95SR Trailer Axle w/ Electric Brakes - 4inch - 5 on 4-1/2 Bolt Pattern - 89inch Long on my trailer but after driving it about 1500 miles I’ve decided that i would be better off without the 4” and with just straight axles. Are these axle beams compatible with the hubs/ebrakes mentioned Etrailer product I purchased?
asked by: Ethan
0
Product Page this Question was Asked From
Trailer Axle Beam with Easy Grease Spindles - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 3500 lbs
- Spindles Only
- 74 Inch Spring Center
- 89 Inch Hub Face
- No Drop or Lift
- etrailer
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Reverse Lockout Solenoid For Dexter DX12.5 Actuator
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: What Comes Included With The Timbren Silent Ride Suspension for Tandem Axles TSR7000T04?
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Does Surge Brake Actuator Need To Be Disabled When Installing EOH Brakes?
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps
- Q&A: Replacement Leaf Springs, Shackles, and Hangers for 2021 Grand Design Transcend 260RB XPLOR
- Q&A: Looking For A Replacement Actuator For My Titan 10 Surg-O-Matic
- Article: Trailer Tire Sizing
- Q&A: Replacement Caliper Solution for Tie Down Engineering 46304
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Where to Measure to Pick Out Replacement Axle for Trailer
Mark P.
2/20/2026
It sounds like you have the same axels that is on my trailer. The electric brakes and hubs installed and work perfectly. It was a very easy install. Mark