How Wide Is The Dexter 7-Leaf Slipper Spring DX73QR For 8k Axles?
Updated 03/04/2026 | Published 02/08/2026 >
Products Featured in This Question
Question:
what is the width of the 7 leaf 8k spring ?
asked by: Tom
0
Expert Reply:
Hi Tom!
The Dexter 7-Leaf Slipper Spring w/ Hook End for 8,000-lb Trailer Axles # DX73QR measures 26-5/8" long and 2" wide. In case you were also curious, it weighs just over 26 pounds as well.
If you don't already have a busing picked out for this spring, you will also want to grab the # DX77XR. This has a 5/8" inner diameter, 1-3/8" outer diameter, and is 2-3/16" long.
What kind of trailer are you looking at this for?
expert reply by:
Lazer S
0
Product Page this Question was Asked From
Dexter 7-Leaf Slipper Spring w/ Hook End for 8,000-lb Trailer Axles - 26-5/8" Long
- Trailer Leaf Springs
- Slipper Springs
- 1-5/16 Inch Eye
- 8000 lbs
- 2 Inch Wide
- 7 Leaf
- 26-5/8 Inch Long
- Standard Grade
- Dexter
more information >
Continue Researching
- Q&A: Measurement on Dexter Axle 7-Leaf Slipper Spring w/ Hook End for 8,000-lb Trailer Axles
- Q&A: Does Roadmaster Make the Long U-Bolt Kit part # RM33KT
- Q&A: Are Dexter Axle Leaf Springs Made in the USA
- Q&A: Looking For 15" Aluminum Liger Trailer Wheels
- Q&A: Replacement Hardware List for the B&W Turnoverball Gooseneck Hitch
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Replacement Leaf Spring for a Dexter 072-98-02 Leaf Spring
- Q&A: Recommended Replacement Leaf Springs for a Dexter 7k Axle
- Article: Slipper Spring Trailer Suspension System Review
- Article: Trailer Wiring Diagrams
- Article: RV Sway Control, Stabilization, and Suspension Enhancement
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs



Lazer S.
3/4/2026
Hey Tom, did the 2-inch-wide Dexter 7-leaf spring end up being the right fit for your trailer? Your update could make it easier for the next person matching springs to a similar setup.