Dimensions of the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box GY33GR for a Rhino-Box

Updated 02/07/2026 | Published 02/05/2026

Products Featured in This Question

Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box - Lippert Rhino - 24K GTW - 4.5K TW

(267)

$1799.95

Safety Chain with 2 Hooks for Gen-Y 5th Wheel to Gooseneck Pin Box - 84" Long - 26,000 lbs

(195)

$100.95

Question:

I have a 2020 ford f350 platinum dually 4x4 with a leveling kit and 35x1250-17 tires on it and wanting to put a GY33GR hitch on a 2022 Aliance Paradigm fifthwheel , will i be to high or can the gen y hitch have adjustment for the high of the truck, thanks

asked by: Rodger O

Expert Reply:

Hey Roger, welcome back! I can give you the measurements for the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box item # GY33GR but I can't answer your question with the information I have available.

If you look at the diagram attached below of the Gen-Y item # GY33GR you'll see that the connection to the gooseneck ball is 21.1" below the top mounting bolts. The connection point is going to be 13.5" forward of the outer most top mounting hole. There's no way to adjust these measurements for additional clearance either. With these two measurements, you'll be able to compare them to your current pin box and get an accurate idea of what/if anything is changing clearance wise.

You will also need the Safety Chain with 2 Hooks for Gen-Y 5th Wheel to Gooseneck Pin Box item # GY49GR. Safety chains are required for gooseneck connections and they are not included with the pin boxes. These will attach to that cross looking cutout by the Gen-Y logo.

If you have any additional questions, go ahead and click on the box that says Add Comment and I'll be happy to answer them.

expert reply by: Jerred H

GY33GR
(click to enlarge)

Rodger O.

2/5/2026

Thank you, ??

Jerred H.

2/5/2026

@RodgerO You're welcome!

Scott

2/6/2026

Not sure with your F350, but i have a dodge 2500, and there is a few inches of adjustment up or down depending on where you place the bolts. I hope that helps a little

Donald

2/7/2026

I read somewere, there is a ball that has some kind of adjustment, just not sure what it is, Might be worth googling it As some have said there is about 1" to 2" holes that can be adjusted.