bing tracking image
Q & A Icon

Upgraded Equalizer, Leaf Springs, and Wet Bolt Kit for 2022 Alliance Valor 36V11  

Updated 02/08/2026 | Published 02/04/2026

Question:

I need to replace my suspension components. Springs, wet shackles, etc. i want to go with the cre 4000 equalizer. Cannyou refer me to the correct parts? 2022 alliance calor 36v11 tandem Dexter 7k axles

0

Expert Reply:

Hey Timothy! It looks like there are both tandem and triple axle versions of the 2022 36V11. I'm assuming you have the tandem axle since you were looking at a tandem axle wet bolt kit. We don't have a way of knowing what is on your trailer so you will need some additional measurements to find the right parts.

The correct MORryde Suspension Upgrade Kit depends on the length of your shackle straps, center hole to center hole. If your existing shackles measure 2-1/4" on center you need # MR46ZR and for 3-1/8" you need # MR76ZR.

For the MORryde Rubber Equalizers for Tandem Axle Trailers (CRE3000) you can use your wheelbase. The # MR87ZR is for a 33" wheelbase. If you have a 35" wheelbase you need # MR27ZR instead.

We already know you have 7k axles so the leaf springs will match this rating. The other piece you need to find a replacement is the length. You can measure the flat length, or spring eye to spring eye. Flat length is going to be the most accurate since you don't have to account for the leaf springs wearing out. I went ahead and attached a link to all of our 7k leaf springs further down on this page. You can also add your measurement in the comments and I'll help you find the best fit.

Where are you headed with your Valor once you upgrade the suspension?

expert reply by:
0
Robin H
Leaf Spring Measurement
Leaf Spring Measurement
(click to enlarge)
Timothy W. profile picture

Timothy W.

2/8/2026

Thanks for the reply! Ill have to measure and confirm. I currently have the cre 300, looking to upgrade to the alltrek 4000. Headed to florida from texas.

Dave L. profile picture

Dave L.

2/8/2026

@TimothyW. He Timothy. I really liked the upgrade kit I purchased. Installation was pretty straight forward. It was a two man job mostly from my inexperience. I replaced all the shackle brackets and bolts. I liked the wet bolts for ease of lubricating. My lap springs were ok so Ileft them alone. Feel free to contact me if you have questions.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>