Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Yes, Demco does have the 21K Autoslide #DM89GV as well as an 18K Autoslide #DM69GV that will fit the factory prep/puck system in a Ram 2500 or 3500 pickup. If you have one of the following pin boxes you will also need the corresponding accessory to…
view full answer...Thanks for all of the info and the research you've already done! Dropping almost 2" from about the point where the king pin connects to the Demco Hijacker 18K #DM69GV or 21K #DM89GV back towards the end of the bed is definitely…
view full answer...Yes, MORryde cushioned pin boxes like #MR84VR can be used with Demco Hijacker Autoslide fifth wheel hitches. There's even a capture plate from MORryde that was designed for this application with the part #DM6025.
view full answer...I spoke to Demco about the Demco Autoslide Locking Plate for Lippert Rhino Pin Boxes part #DM76FR, the side plates are supposed to be angled as that's what provides the clamping force. I would just make sure you have the bolts torqued fully to…
view full answer...I do see your Demco Autoslide 5th Wheel Trailer Hitch #DM8550035 is missing the Capture Plate #DM14743-95 and other components on the Head #DM6081. And as you have a Rhino pin box you need the Locking Plate #DM76FR as well to prevent the Demco from…
view full answer...Hello David. The Correct Track Trailer Alignment and Lift Kit #RR23QX is definitely going to be your best bet for lifting your 2023 Dutchmen 2533RDF. That said, this kit is not made for any one specific camper, so we generally would want you to check…
view full answer...Yes you are - all 5th wheel hitches are going to require some type of rails in order to be used. So you'd need #DM8552016-71 for your 2006 Dodge Ram.
view full answer...If you do not want to use a sliding 5th wheel hitch then your only option is a fixed 5th wheel hitch with a rotating pin box. I personally prefer the Reese Sidewinder Rotating Pin Box over the MORryde Rotating Pin Box because there are custom wedges…
view full answer...A junction box/7-way plug kit like Epicord #277-000141 or #HS381-9000 lets you convert the camper to match the 7-way RV blade type connector format. This avoids the extra connection points and potential trouble spots from using separate adapters.…
view full answer...The Demco Hijacker Autoslide 5th Wheel Trailer Hitch w/ Slider part #DM8550034 works with most standard pin boxes for the exception of Sidewinder or Revolution's. However, if you have one of the following pin boxes: Glide Ride, Mor Ryde, Trailair…
view full answer...For standard pin boxes you do not need to use a locking plate with the Demco Hijacker hitch #DM8550034 but if you use the following cushioned pin boxes: Glide Ride, Mor Ryde, Trailair Tri Glide, Trailair Flexair, Rota Flex, and 5th Airborne you would…
view full answer...You currently have 2 options since your current Airborne Sidewinder pin box is not going to fit your new 2022 Vengeance Rogue toy hauler. We do have the new Sidewinder #RP34FR which has added the new bolt pattern for the Lippert Rhino pin box.…
view full answer...Filter Your Search
Contact and Help