Recommended Timbren Axle-Less Trailer Suspension w/ Braking Hubs and a 5 on 4-1/2 Lug Nut Pattern
Updated 02/10/2026 | Published 01/22/2026 >
Products Featured in This Question
Question:
Hello, I’m building a camper trailer on an old 2000lb axle/leaf springs trailer. The axle width is 62” w/ 5x4 1/2 hubs and has no brakes or mounting plate for brakes. I am interested in electric brakes/parking brakes for the trailer. Do you sell a complete axle assembly that I could swap out or only individual components? If only components what would be the best options for parts? Thank you
asked by: Todd D
Expert Reply:
Hey Todd. The only complete axle assemblies we have that would work with your trailer are the Timbren Axle-Less Trailer Suspension w Electric Brakes No Drop - item # A35RS545E or the Timbren with a 4" Drop item # A35RD545E. Both these axleless systems will attach directly to your trailer's frame. They include brake assemblies and braking hubs with a 5 on 4-1/2 lug nut pattern.
We don't have a 62" wide traditional axle that short you can add brakes to.
To add brakes to your axle. You'll need a brake flange welded onto both sides that matches the diameter of your axle. A set of left and right brake assemblies and two braking hubs with a 5 on 4-1/2" lug pattern.
In order to recommend the correct parts, I'll need to know the diameter of your axle and the size of the bearings inside of one of your hubs.
You can add this information, along with any other questions you have, where it says Add Comment.
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension w Electric Brakes - Standard - 4" Drop - 5 on 4-1/2 - 3.5K
- Trailer Axles
- Rubber Spring Suspension
- Standard Grade
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- Universal Fit
- Drop - 4 Inch
- Timbren
more information >
Continue Researching
- Q&A: Will the Coleman-Mach Everest 18K BTU AC Work with the In-Command System on My Keystone?
- Q&A: Is It Possible to Add an Axle to a Single Axle Trailer
- Q&A: Replacement Spindle and Axle Options For a 3,500LB Trailer Axle With Bent 4 Drop Spindle
- Article: How to Choose a Trailer Hitch Coupler
- Q&A: What is Difference Between Dexter Hubs # # 8-201-9UC3-EZ and # 8-201-5UC3-EZ
- Q&A: Brake Controller Installation Cold Wire for Brake Control on 2021 Chevrolet Express 3500
- Q&A: Hub Face Measurement for Tire Clearance on 3,500 Pound Timbren Axle-Less Trailer Suspension System
- Q&A: Can Disc Brakes be Added to the Timbren Axle-Less Suspension Systems
- Article: Trailer Wiring Diagrams
- Article: Where to Position the Trailer Axle?
- Article: Trailer Lighting Requirements
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Trailer Tire Sizing
- Article: How to Tell the Weight Rating of a Trailer Axle



Jerred H.
2/10/2026
Hey Todd, what did you end up doing for your camper trailer—did one of the Timbren axle-less suspension systems work out for your setup? Once you had it mounted, how did the electric brakes perform? Your update could make it easier for others building similar trailers.