How Does Brake Controller Install on 2006 Itasca Meridian on Freightliner Chassis
Updated 01/21/2026 | Published 01/17/2026
Products Featured in This Question
Question:
How about the best brake controller for a 2006 Itasca Meridian with Freightliner chassis, and plug location?
asked by: Mike
0
Expert Reply:
Hey Mike, to install a brake controller in your 2006 Itasca Meridian built on a Freightliner chassis the plug will be under the dash near the steering column and the correct harness is the part # 3027-P which will let you wire in a brake controller like the very popular P3 part # 90195. This is the best performing and easiest to understand brake controller so we recommend it the highest.
expert reply by:
Jameson C
0
Continue Researching
- Q&A: Can Two Solar Panels Be Added to Setup With Single Panel and 30 Amp Solar Controller
- Q&A: Do I Need a 30 amp or 60 amp Controller for Two 200 Watt Solar Panels?
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Parts Needed to Flat Tow a 2003 Subaru Forester
- Q&A: Brake Controller Installation on 2011 Tiffin Motorhome on 2011 Freightliner Sprinter Chassis
- Q&A: Finding Brake Controller Connector Under Dash of 2009 Tiffin Phaeton Motorhome
- Article: Must-Have Flat Towing Components
- Q&A: Parts Needed to Expand Go Power Solar Setup from Two to Four Panels
- Article: Brake Controller Installation: Starting from Scratch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: The Definitive, Step-by-Step Flat Towing Setup Guide
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)
John S.
1/20/2026
After searching, the wire harness was indeed under the dash in the area of the steering column on my 2004 Winnebago Journey 36G. Truly plug and play!