Recommended Roadmaster Comfort Ride System for a 5th Wheel Trailer w/ 4,400 lbs Axles
Updated 01/24/2026 | Published 01/17/2026 >
Products Featured in This Question
Question:
Which Roadmaster Comfort Ride System Fits 2021 Reflection 150 260OD
asked by: Mark J
Expert Reply:
Hey Mark, thanks for the information! For your 2021 Grand Design Reflection 260, you'll want the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers item # RM-2460-2560. This system is rated for 5,000 lbs axles so it'll be perfect for your 5th wheel trailer. The included shock kit is really going to take the bounce and road shock out of your travels.
You'll also need two sets of the U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles item # MR66ZR. U-Bolts are only meant to be torqued down once so you'll need to swap your current ones out for a new set.
What kind of roads are you traveling on that has you making this upgrade?
You can add this information, along with any other questions you have, where it says Add Comment.

Charlie H.
1/24/2026
Hi Mark , you asked about my roadmaster comfort ride system. So far I have been happy with it , I have only put about 7000 miles on it, most of of those are BC ,YT and eastern Alaska. I torque all bolts and U bolts to require torque and re check every so often no issues yet. Charlie H.
Product Page this Question was Asked From
Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers - Tandem 5K Trailer Axles
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Leaf Spring Replacement System
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- 5200 lbs - 7000 lbs
- Round Axle - 3 Inch
- Tandem Axle
- Roadmaster
more information >
Featured Help Information
Instructions
Continue Researching
- Search Results: road master
- Shop: MORryde U-Bolts for 5,200-lb to 7,000-lb Round Trailer Axles - Qty 4
- Shop: Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers - Tandem 7K Trailer Axles
- Shop: Dexter Trailer Springs Over-Under Conversion Kit
- Shop: U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts
- Video: Feature Breakdown: MORryde U-Bolts for 5,200-lb to 7,000-lb Round Trailer Axles
- Video: MORryde Round Trailer Axle U-Bolts Installation - 5th Wheels
- Shop: U-Bolt Plate for 3" Diameter Axle, 1-3/4" Wide Spring - 1/2" Bolts - Galvanized
- Shop: U-Bolt Plate - 2-3/8" Diameter, Round Trailer Axle - 1-3/4" Wide Spring - 1/2" Bolts
- Q&A: Recommended Roadmaster Comfort Ride Kit for a Trailer w/ 4,400 lbs Axles
- Q&A: Correct Roadmaster Comfort Ride Leaf Spring Suspension Kit For 2023 Keystone Bullet Premier 25RKPR
- Q&A: Replacing Old WFCO 9800 Converter Power Box In Forest River Travel Trailer
- Q&A: Wet Bolt Recommendation For the Roadmaster Comfort Ride Leaf Spring Suspension Kit
- Q&A: Comfort Ride Shock Absorbers For Grand Design Trailer With Tandem 3 Inch Diameter Axles
- Q&A: What Roadmaster Comfort Ride Leaf Spring Suspension Kit For 4,400 lb Axles?
- Q&A: What Is The Difference Between Roadmaster Comfort Ride RM-2460-2570 and RM-2460-2580?
- Article: Slipper Spring Trailer Suspension System Review
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Stability Control for Heavy Duty Vehicles
- Article: Determining Trailer Tongue Weight
- Article: Trailer Wiring Diagrams
- Article: Best Vehicles to Flat Tow Behind an RV



Phil W.
1/18/2026
I installed the Roadmaster comfort ride 5400# axle kit with shocks on my 30’ Jayco HT 5th Wheel. I also installed Moryde plus and X cross brace kits on forward and tear spring hangers. The installation is time consuming and you need to check that your frame is compatible with the Roadmaster center leaf spring mounting bracket hardware. Mine was not and required custom made anchor mounts inside the square tubing frame. Fairly simple to fabricate and install. Bottom line - the kits and installation time was well worth the investment. We traveled cross country (7,000 miles) with the kit last year and the unit towed perfectly and tire wear when measured with a tire gauge was exactly even across all four tires.