Do I Need to Use Outer Washer with CE Smith Trailer Hub # 13515
Published 01/08/2026
Question:
For the CE Smith 13515, does it require an outer bearing washer? I didnt have one before on the spindle. Thanks!
asked by: Dale G
0
Expert Reply:
Hey Dale, you do not need to use an outer bearing washer with the CE Smith hub part # CE13515 that you referenced. You can put it on your spindle without one and it will be just fine. Are you wanting this as a backup or do you need a new huib?
expert reply by:
Jameson C
0
Product Page this Question was Asked From
CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L68149 / L44649
- Marine Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- CE Smith
more information >
Continue Researching
- Search Results: ez lube grease cap trailer bearings races seals caps
- Q&A: What Type of Grease Comes in CE Smith Trailer Hubs
- Q&A: Should Bearing Buddies Buddies be Used on EZ Lube Trailer Axles
- Shop: LubriMatic Marine Trailer Wheel Bearing Grease - 3 oz. Cartridges - Qty 3
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Q&A: Replacement Idler Hubs For a 1990's Calkins Boat Trailer With 45264 Idler Hubs
- Q&A: Replacement Bearing Set for Freedom Axle 45264 3500 lb Idler Hub
- Q&A: Is Red & Tacky Grease Compatible With CE Smith Hub CE13515
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: What Kind of Grease is in the Galvanized CE Smith Trailer Idler Hub Assembly CE13515?
- Shop: #42 E-Z Lube 4" Drop Spindle w/ Flange for 5.2K to 7K Trailer Axles - 3" Diameter
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Shop: CE Smith Tapered Spindle Axle - Weld On - 1-3/8" to 1-1/16"
- Shop: #42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles - 2-1/4" Diameter
- Shop: BTR E-Z Lube Spindle w/ Brake Flange for 2,500-lb Trailer Axles - 1-5/16" Diameter
Dale G.
1/8/2026
Thanks! I had one on hand I bought from you a while back and just put it on.