Everything I Need For a Complete 20 Foot Awning Kit

Question

Question:

this kit have the led strip light and bracket included or do you need to buy it separate if so. i can only find the replacement led strip light. I just want to make sure i have all the parts i need to get this installed 1. This 20foot awning kit 2. 21foot of rail for awning and tape 3. Wind senser ? 4. Led strip light and mounting kit ? Is there anything else that i would need?

asked by: Jeff L

0

Answer 1

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 2

Hey Todd! The replacement for your 1510000140 is the Replacement Control Unit for Kwikee 40 Series Electric RV Steps #LC363985. Any big plans with the Odyssey once you get the stairs up and running again?

view full answer...

Answer 3

Hey Kevin. Our Replacement Fabric for etrailer Powered RV Awning item #e86QV is just the replacement fabric. It'll attach to your existing awning roller so long as you have a 20' powered awning. There is no stitching built into the fabric for…

view full answer...

Answer 4

Hey Susanne. The Solera Manual Retractable Awning to Electric RV Awning Conversion Kit you were looking at, does not work with Dometic awnings only Solera ones, but I have an alternative. It looks like your 2004 Gulf Steam Innsbruck 265tbs travel…

view full answer...

Answer 5

Hey Nick, thanks for reaching out. Yes, the Replacement Fabric for etrailer Powered RV Awnings #e96QV will work with other brands of awning like Solera or Dometic which are what we commonly see on campers like your 2011 Forest River Cherokee 29U. The…

view full answer...

Answer 6

Hello Mike, If your Solera Series 3000 has the smart arms like the Solera Smart Arm Electric RV Awning Conversion Kit #LC759405 then you can add the Wind Sensor for Solera Smart Arm 12V Power RV Awnings #LC715123 with mounting hardware #LC52AF, the…

view full answer...

Answer 7

Hey Howard, the easiest way to determine what your total trailer weight is would be to find a local weigh station to you and just pull the trailer onto the scales. Then you can determine from there with a tongue weight scale like the part #BTBRV004…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 10

Hey Tim welcome back! Your ARH15AACBL2 GE AC unit has the old 410a refrigerant in it so the GE Appliances item #GE64FR you were looking at isn't going to work as a replacement. The EPA mandated R32 refrigerant has been used in all new AC's…

view full answer...

Answer 11

Hey Donny! For your Dometic Penguin/Brisk Air 15,000 BTU AC model B59516.711C0-MX, the correct soft start is the #DMC93JF. This is designed for Dometic Brisk II electronic air conditioner units with in-wall thermostats.

view full answer...

Answer 12

Hey Keith! I can definitely help you find a replacement for your Dometic Duo Therm. However, you're going to have to replace the thermostat and air distribution box as well. Your current setup is for R410A and everything switched to R32 last year…

view full answer...

Everything I Need For a Complete 20 Foot Awning Kit

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching