Looking for Replacement Axle for 2015 Tear Trailer

Question

Question:

I have a 2015 Tear Trailer that says TC on the title. The axle number is S/N 129999258. The HF is 72.00 and SC is 58.00. Can you help me figure out which products replace this axle? Thank you.

asked by: Brianna N

0

Expert Reply:

Hey Brianna, we have almost all of the info needed to pick out a trailer axle for your trailer but the last piece of info we need is the weight capacity of the axle. This should be listed on the tag on the axle that you found the serial number on. Hopefully it's a 2.2k axle as we have the configuration you need in that capacity like with the part # 20545I-EZ-72-10 which comes with hubs that have 5 on 4-1/2 inch bolt patterns.

Or for just a bare axle without hubs we have the part # T20BTR-EZ-7258.

expert reply by: Jameson C

0

Brianna N.

11/23/2025

Hi Jameson. My axle is bent so I want to upgrade to a 3500lb axle. Is that possible? Thanks, Bri

Jameson C.

11/24/2025

@BriannaN Yes it is. I would need to know the distance between the spring seat centers of your current axle and from hub face to hub face. You'll also need to get me the wheel bolt pattern as you'll need new hubs as well.

Answer 1

Hello Philip, We don’t have an exact match for your specifications. The closest option we carry is the axle you were looking at: Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 72" Long - 2,000 lbs #e62YR. The 72" hub face matches your…

view full answer...

Answer 2

I would be happy to help you determine the correct replacement axle for your 2000 Bass Tracker Pro Team 175 and Trailstar trailer but the axle length is actually measured hub face to hub face so you will want to put your hubs back on temporarily and…

view full answer...

Answer 3

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 4

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

There is no exact way to determine the leaf spring length. The best way to determine the length for a replacement is by measuring the existing leaf springs. The hanger distance and shackle length can help you get a good idea, but you're looking…

view full answer...

Answer 9

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 10

Hi Chas, The Lippert Road Armor Shock Absorbing Equalizer part #LC53CK may work for your trailer, but that will depend on what equalizer is currently on your trailer. In order to determine what equalizers would be a fit for your trailer, we'll…

view full answer...

Answer 11

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 12

For a single axle trailer, you want the shackle strap to be able to move so that you have the spring deflection needed for your suspension. Angled like the photo or even almost vertical is fine you just don't want the shackle strap to bind and…

view full answer...

Looking for Replacement Axle for 2015 Tear Trailer

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching