Will Westin Hard Tri-Fold Tonneau Cover Fit 2025 Toyota Tacoma With Utility Track System

Question

Question:

Does this tonneau work with the oem utili track system?

asked by: Michael C

0

Expert Reply:

Hey Michael! I reached out to Westin and found that the Westin Hard Tri-Fold Tonneau Cover # W38VM will work with the deck rail/utili track system on the 2025 Toyota Tacoma. This is designed to fit the 5' bed. If you have any other questions feel free to reach out in the comments below.

expert reply by: Robin H

0

Westin Hard Tri-Fold Tonneau Cover
(click to enlarge)

Robin H.

12/8/2025

Hey Michael, how did the Westin Hard Tri-Fold Tonneau Cover work with your Tacoma’s utili track system? Your update could make it easier for the next person with the same setup.

Answer 1

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

Hey Brent, welcome back! I did some digging and the High Tide 2025 Jeep Gladiator is a Florida exclusive version that is very similar to the Sport model so for a Demco base plate kit you'd need the part #DM9519336. Then for a lighting kit we have…

view full answer...

Answer 6

Hi Trip; it looks like you ended up replacing the pair with #K23-478-479 which was the right choice. Unfortunately, brands don't cross over with these 4,400 lb axles so Lippert isn't an option. The price is comparable for the pair of Lippert…

view full answer...

Answer 7

The only difference between the base plates for your 2021 Jeep Wrangler Unlimited is that one, the Blue Ox, has mounting tabs for a connector plug, while the Curt does not: - Connector Plug Mounting Tabs: Blue Ox Base Plate Kit - Removable Arms…

view full answer...

Answer 8

Hello Brooks. The etrailer Boat Trailer Jack #MJ-1500B-DWL does not have a zerk fitting for adding grease. The best way to keep rust at bay is to keep the jack clean and dry. Rinse it with fresh water after dunking it in the salt, and do your best to…

view full answer...

Answer 9

You can try using quick-links to add length to your safety chains, but your best option is going to be to use a different set of chains that are longer. For a 27 inch long chain rated at 5K, go with the #2118-605-04. For a 48 inch chain with the same…

view full answer...

Answer 10

Hello Robert, thanks for reaching out. No, Yakima doesn’t make a bracket to run a LockNLoad platform directly on the old rain gutter towers like the #Y00101. Those platforms are built around their newer tower system, and the only adapters they offer…

view full answer...

Answer 11

Hey Justin, thanks for reaching out. We can definitely get you a weight distribution hitch for your 2026 Jayco Jay Flight SLX 170BH, but the Curt #C69JR you mentioned is a bit overrated for that setup. That is for trailers with a tongue weight…

view full answer...

Will Westin Hard Tri-Fold Tonneau Cover Fit 2025 Toyota Tacoma With Utility Track System

Product Page this Question was Asked From

Continue Researching