Where Should Rear Hanger Location be for Slipper Springs
Updated 10/06/2025 | Published 10/04/2025
Question:
When u weld the rear hanger is there a certain amount of the leaf spring passed threw the hanger?
asked by: Dion
0
Expert Reply:
Hey Dion, on slipper springs like the part # e89SR that you referenced the rear hanger location should be right in the middle of the flat portion on the back of the spring. It's not an exact science but having the hanger sit right in the middle of the flat portion of the spring allows it to move like it needs to when suspension is compressed and also not slip out.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
4-Leaf Slipper Spring w/ Flat End for 3,700-lb Trailer Axles - 30" Long
- Trailer Leaf Springs
- Slipper Springs
- 9/16 Inch Eye
- Nylon Bushings
- 3700 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 30 Inch Long
- Standard Grade
- etrailer
more information >
Continue Researching
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-1/4" Long
- Search Results: trailer suspension parts
- Shop: 4-Leaf Slipper Spring w/ Flat End for 3,700-lb Trailer Axles - 30" Long
- Shop: Single-Axle Trailer Hanger Kit for 1-3/4" Slipper Springs - 1-1/2" Tall Front
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Shop: Rear Hanger for 1-3/4" Slipper Spring
- Shop: 4-Leaf Slipper Spring w/ Hook End for 4,000-lb Trailer Axles - 26-5/8" Long
- Shop: 3-Leaf Slipper Spring for 1,500-lb Trailer Axles - 24-1/4" Long - EMCO
- Q&A: Replacement Hub for a Hub Stamped H1000 R
- Article: How to Change the Axle on your Boat Trailer Without Leaving your Driveway
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Replacement Suspension For a Old Trailer With 32-1/4" Slipper Springs and 1-3/4" Axles
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: How Do The etrailer Single Axle Trailer Fenders Install?
- Q&A: Replacement Axle for Harbor Freight Trailer 4x8 Foot 1195 lb Capacity
- Q&A: Parts Needed For Adding 1,000LB Slipper Springs To a Cart With No Suspension
- Q&A: Replacement Leaf Springs For An Ice Shanty Trailer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Tire Sizing
- Q&A: Need a Replacement Axle for my Trailer
- Article: How Long will the Axles Last on my Boat Trailer?
- Article: Slipper Spring Trailer Suspension System Review
Dion
10/6/2025
Thank u very much for your reply that's what I needed to know. Very appreciative of your help. Thanks again!!