Is There A Galvanized Triple Axle Hanger Kit?
Updated 09/19/2025 | Published 09/11/2025 >
Question:
APTT5 triple axle kit. Are any of these parts galvanized? Hangers and shackles? I want to convert boat trailer from double axle slipper spring to a triple axle, double eye spring set up. It is used in salt water.
asked by: Joe
Expert Reply:
Hey Joe,
The triple axle kit # APTT5 is not a galvanized steel kit, it is going to be powder coated. I took a look through the different kits we have and I did not see a hanger kit that is galvanized. We do have leaf springs that are galvanized themselves but in terms of a full triple axle kit we do not have one that has galvanized pieces.
What king of trailer are you wanting to do the work on?
Product Page this Question was Asked From
Triple-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear/Center
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Triple Axle
- etrailer
more information >
Continue Researching
- Q&A: Will Triple Axle Hanger Kit # APTT5 Work with Leaf Springs E64SR
- Q&A: Replacement Leaf Spring for 7k Rated Trailer Axle that is 25-1/4 inch Long
- Q&A: How to Flip a 2" Square Axle so the Axle is Below the Springs
- Q&A: Direction of Equalizer # TREQ105 When Installed on Triple Axle Trailer
- Q&A: Recommended Hydraulic Trailer Jack to Work w/a Existing Hydraulic Pump System
- Q&A: Recommended Leaf Springs and Equalizers for Triple Axle Trailer With Double Eye Springs
- Article: Where to Position the Trailer Axle?
- Q&A: Axle Placement When Building A Three Axle Trailer
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Where Should the Heavy Weight Be on a Trailer?
- Article: Trailer Wiring Diagrams
- Article: 7 Common Questions Everyone Has About Trailer Tires


Joe
9/18/2025
It is an aluminum I beam trailer. Are the parts available individually, make my own kit?