Looking For Hubs And Bearings For Extreme Custom Trailer
Updated 09/29/2025 | Published 09/10/2025
Question:
I am needing parts for a extreme custom trailer. is this something we can get from you? we need hub and bearing kit, front and rear bearing with seal and hub cap
asked by: Tammy M
Expert Reply:
Hello Tammy, thanks for reaching out. We do carry lots of hubs and bearings so we very well may have what you need, but there is no way to look up your trailer to know exactly what bearings and hubs it uses.
Can you provide the casting number from one of your hubs? Brake drums have a casting number on the front, and idler hubs have a number on the back. That will be the best way to determine what you need and this works MOST of the time.
How old are your axles? Any idea what the axle weight capacity is?
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Q&A: Difference Between Dexter and etrailer Hub/Drum Assembly for 3,500 lb Axles
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Suspension Enhancement Recommendation for Trailer with Dexter 2,000 lb Axles
- Q&A: Comparing the eTrailer and Dexter Electric Trailer Brake Kits
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Correct Replacement for Tru-Ryde Hub/Drum RVD-H-545
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Can I Add Electric Brakes To A 1993 EZ Loader Boat Trailer
Jesse M.
9/29/2025
Hey Tammy, did you have a chance to find the casting number on your hubs? I'm asking because it could really help others in a similar situation figure out what they need.