Is There An Upgrade Kit For Adding Strut Assist To MORryde RV Steps?

Question

Question:

Is there an upgrade kit to add strut assist to Morryde step above steps?

asked by: Clifton V

0

Expert Reply:

Hello Clifton, thanks for reaching out. I am sorry to say there is not an upgrade kit for adding the strut assist to a MORryde step that didn't come with one. The only solution would be to completely replace your step with a strut assist model. If you can let me know what step model you have now, I am happy to look into it and see if we have a strut assist model for you. Let me know.

expert reply by: Jesse M

0

Jesse M.

9/12/2025

Hey Clifton, did you have a chance to find out which step model you have? I'm here to help you find a strut assist model if you're still looking for a solution.

Clifton J.

9/12/2025

@JesseM I had the dealer swap it out. Thanks.

Answer 1

Hey Dan! That is definitely the struts wearing out. You can replace them with the #MR56DR. If you need anything else don't hesitate to reach out in the comments below.

view full answer...

Answer 2

Hello Mike. The Sway Control 2-Ball Platform for BulletProof Hitches Ball Mount #BPH76RR is made to fit a 3" channel. The 2" hole spacing is also correct, so this ball platform will work well with your Curt Channel Style Adjustable…

view full answer...

Answer 3

I do have an option but 16" wheels require a larger 6 or 8 bolt pattern so this isn't possible unless you replace the hubs as well and there might not even be an option for that. Why do you want to change wheel/tire sizes, do you want to…

view full answer...

Answer 4

Yes, the Furrion Chill RV AC Unit part #FR25PR that you referenced does have a start capacitor built into it which is basically a soft start so that it doesn't draw as much amperage upon start up.

view full answer...

Answer 5

No, you would need 30 amp service in order to fully power the Furrion Chill HE RV Air Conditioner System #FR52PR. If you're boondocking then you'll pretty much be forced to use a generator like #333-0005, unless you had an insanely large…

view full answer...

Answer 6

We do have replacement struts for the MORryde Stepabove RV steps wih the part #MR65DR.

view full answer...

Answer 7

While we do not have a video on how to replace the strut assist on your MORryde StepAbove RV Steps #MR28RR, I would be happy to walk you through it. Before we begin, you'll want to follow the below preparation steps: Step 1: Remove the step’s…

view full answer...

Answer 8

I spoke with the manufacturer tech and they stated the part that broke for you is replaced with the Replacement 2 Piece Ball-Stud Parts Kit for MORryde Strut Assist StepAbove RV Steps Item #MR29UR.

view full answer...

Answer 9

Hey Nick, thanks for reaching out. Yea that latch in your picture is definitely not a standard size. The big thing to figure out here is the size of your door cutout. That will be the main factor in determining what latch you can use. For example,…

view full answer...

Answer 10

Hey Lester. The 2016 Grand Design Reflection 337RLS uses a Schwintek system. The motor should be located at the top of the vertical column on either side of the slide-out, which is accessible from the outside. You'll need to pull back the rubber…

view full answer...

Answer 11

Hey Ken, thank you for all of the photos! All of the MORryde StepAbove RV Steps actually use the same struts so the Replacement Gas Strut #MR56DR you're looking at will work for your steps! Please note that this comes in a quantity of 1 so if…

view full answer...

Is There An Upgrade Kit For Adding Strut Assist To MORryde RV Steps?

Product Page this Question was Asked From

Continue Researching