Will NuCamp Trailer Jack Fit a Lock N Roll Coupler Kit?
Updated 09/12/2025 | Published 08/29/2025
Question:
I’m interested in the lock and roll bolt in 11,000 lb set up for my NuCamp 2022 T @B 320S boondock camper . It has the standard crank tongue jack and it looks like this is a direct bolt in option . Lock-N-Roll/LR73VR
asked by: Robert S
Expert Reply:
Hey Robert!
The mounting bolt hole pattern for the jack on the Lock N Roll Articulating Coupler # LR73VR is 3" on center. It does have elongated bolt holes, so if your pattern it slightly smaller or larger this will still work.
I'm not sure the standard size of the jack on your NuCamp, but this has a 2-5/16" diameter hole for the jack to fit through.
The Lock N Roll coupler was MADE for boondocking, so I'm glad you found it! Will you be towing it with a Jeep?
(click to enlarge)
Product Page this Question was Asked From
Lock N Roll Articulating Coupler - A-Frame Coupler w/ Jack Hole - Bolt-On - Trailer Side - 11K
- A-Frame Trailer Coupler
- Off Road Coupler
- 50-Degree Frame
- Bolt-On
- 11000 lbs GTW
- Latch Plates
- 2-5/16 Inch Hole
- Standard Grade
- Lock N Roll
more information >
Continue Researching
- Q&A: Which Lock N Roll Coupler Fits On a 2005 Strarcraft RT10 Pop Up Camper?
- Q&A: Recommended Lock N Roll Channel Tongue Trailer Coupler for a 2-1/2" Square Trailer Tongue
- Q&A: Parts Needed To Switch Trailer From Standard Ball Coupler To Pintle Hitch System
- Q&A: Choosing the Correct Rise/Drop for Lock N Roll Articulating Hitch
- Q&A: Trailer Dolly Compatibility with Lock N Roll Hitch
- Q&A: What Is The Angle For The etrailer A-Frame Trailer Coupler?
- Q&A: How to Install 7-Way Trailer Connector on 2017 Jeep Wrangler JK Without Tow Package
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Where to Position the Trailer Axle?
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Can You Flat Tow a Jeep Compass?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
Jon G.
9/12/2025
Hey Robert, Did the Lock N Roll coupler fit well with your NuCamp camper? I'm curious if it worked out for your boondocking adventures. Your experience could help others looking to upgrade their setup!