Is There A Zero Drop/Rise Ball Mount That Has A Sway Control Tab?

Updated 08/27/2025 | Published 08/26/2025

Products Featured in This Question

Curt Heavy Duty Forged Ball Mount for 2" Hitches - 3" Rise - 4" Drop - 17,000 lbs

(837)

$58.73

2" Hitch Ball - 2" Rise - 1" Diameter x 2-1/8" Long Shank - 6,000 lbs

(3914)

$30.11

Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long

(3886)

$32.59

Curt Ball Mount w/ Sway Control Tab for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs

(174)

$46.83

Question:

I am looking for a 2x2 ball mount with 2” ball with very little or no rise that has or accepts a bracket for an anti sway bar

asked by: Joshua M

Expert Reply:

Hi Joshua!

I do have a couple potential option for you, but we do not have any ball mounts with no drop or rise that will work for this purpose. With that said, you could go with one of the two options below:

Option 1:
Curt Ball Mount w/ Sway Control Tab for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs # D320
Curt 2" Hitch Ball - 2" Rise - 1" Diameter x 2-1/8" Long Shank - 6,000 lbs # C40034

Option 2:
Curt Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long # D-26
Reese Sway-Control Bracket for 2" Ball Mounts - Class III and IV # RP26003
Curt 2" Hitch Ball - 2" Rise - 1" Diameter x 2-1/8" Long Shank - 6,000 lbs # C40034

Either of these would do what you need, but you will be limited to 6,000 pounds. I would probably go the lesser expensive route with Option 1, but figured I would include more than just one way to do it.

What are you towing and what are you towing it with?

expert reply by: Lazer S

Joshua M.

8/27/2025

4000-4500 lb camper with single sway bar. 2015 f150

Lazer S.

8/27/2025

@JoshuaM Gotcha. I think either of the options I mentioned above would work for you. Option 1 would be less expensive and probably the way I would go. : ) Let me know if there is anything else I can help with!