Looking for Hub/Drum that Can Fit Axis 3500 Trailer Axle
Updated 08/15/2025 | Published 07/24/2025
Question:
Hello, I have an Axis 3500 LBS trailer axel that I am needing new hubs. The serial number is 69041A 021- 08/03. Id like to confirm your Part Number: AKIHUB-5475-35-EZ-K will work? Thank you for your time.
asked by: Russell W
Expert Reply:
Hey Russell, since your Axis 3,500 lb axle was made in 2003 based on what you mentioned yes the replacement hub/drum part # AKIHUB-5475-35-EZ-K that you referenced will fit. This does use the bolt pattern of 5 on 4-3/4 inch which is not quite as common as 5 on 4-1/2 inch so I would recommend you verify your wheel bolt pattern if you can.
I attached a help article on wheel bolt patterns for you to check out as well.
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-3/4 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-3/4 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Looking For Conventional Ramp Door Spring For 7' Wide Trailer With Extremely Heavy Door
- Q&A: Replacement 1998 PJ Utility Trailer Hub with QRG 3G and 84000 Stamped Into Hub
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Q&A: Installation of Emergency Break Away Cable Repair Kit for Dexter Axle A-60 Brake Actuators
- Article: Printable Trailer Bolt Hole Pattern Template
- Q&A: Troubleshooting Electric Trailer Brake Assemblies
- Q&A: Troubleshooting Brand New Trailer with Weak Electric Brakes
- Q&A: Troubleshooting Weak Braking on One Side After Installing New Trailer Brakes
- Article: How to Measure a Trailer Axle
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Tell the Weight Rating of a Trailer Axle
Jameson C.
8/15/2025
Hey Russell, did you have a chance to verify your wheel bolt pattern with the help article I attached? I'm asking because I want to make sure everything fits perfectly for you and help others in a similar situation.