Do You Have a Hitch and Trailer Wiring for My 2003 Ford E-450 RV Cutaway Ex Ambulance?

Question

Question:

I have a 2003 e450 now rv ex ambulance I am wanting to get a hitch for frame measurement is 42 out side frame bracket can you help me

asked by: Carla

0

Back of Old Ambulance
(click to enlarge)

Expert Reply:

Hello Carla,

We have the perfect fit for you, the Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center - Custom Fit - Class V - 2" # 41945 is confirmed to fit your E-450 RV Cutaway. You will need to remove the back step in order to have a hitch back there.

If you need some wiring to pair with it, you will want the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118344, this will get a 4 flat on the back. If you are looking to tow something with brakes you will need to add onto the # 118344 by installing the Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires # ETBC7. You will need to run a brake wire from the front to the back, as well as a power wire from the battery with a couple of amps to the rear as well.

What are your plans with this ex ambulance? Transforming it into a mobile business, camper, etc.? So many possibilities!

expert reply by: Kate F

0

Draw-Tite Hitch Dimensions
(click to enlarge)

Carla

7/22/2025

I am going to haul our horse trailer for my grandkids

Reply

Kate F.

7/22/2025

@Carla How fun Carla!! I showed a little Western as a kid, and would love to have horses again one day. Making happy memories with the grandkids, I love it!

Reply

Answer 1

Since you don't have a tow harness easily available you'll need to first install a 4-pole connector like #18002. The brown wire will tie into your E-450's running light circuit, yellow will tie into the left turn, green will tie into the…

view full answer...

Answer 2

As long as your rear bumper looks the same as the one I have attached a photo of, the Draw-Tite Ultra Frame Trailer Hitch Receiver part #41945 will fit and work well for your 2011 Ford E-350. This is a Class V hitch with a 2" receiver tube…

view full answer...

Answer 3

The distance between the mounting holes from side to side on the Draw Tite trailer hitch part #41945 are 38-1/2 inches. This hitch fits the following vehicles: 2004 - 2014 Ford Van E-150 2004 - 2014 Ford Van E-250 2004 - 2014 Ford Van E-350 2000 -…

view full answer...

Answer 4

Hey Ronnie, the Voyager Monitor #VOM719WP will replace your AOM-7694 monitor per Voyager, but you will have to splice the existing wires from your AOM-7694 to the new Voyager Monitor. There is no direct plug and play replacement monitor.

view full answer...

Answer 5

The Voyager monitor part #VOM719WP will work great as a replacement monitor for what you have now with the AOM-7694.

view full answer...

Answer 6

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Answer 7

Hello Jerry, cool car! I see you were looking at the DeeMaxx Disc Brake Kit #DE42FR. This is a disc brake kit intended for a trailer with a standard 3,500 lb axle. It has slip-on rotors that will work with an idler hub for a 3,500 lb axle like part…

view full answer...

Do You Have a Hitch and Trailer Wiring for My 2003 Ford E-450 RV Cutaway Ex Ambulance?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching