Replacement 7k Axle With 95" Hub Face And 77" Spring Center Measurements
Updated 08/07/2025 | Published 07/09/2025
Products Featured in This Question
Question:
Looking for a 7000lb axle with 95 hub face and 77 spring center. The current axle part that I am replacing is AX709577001.
asked by: Ryan M
Expert Reply:
Hi Ryan!
Well I can say the Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 7,000 lbs # 8327834 you found matches the capacity and hub face dimension perfectly, but the spring seats are a bit off. This is a very common occurrence and we do have the # TRSS300 spring seats that are needed to get it fixed (which you will need two of). You will just need to weld them on (or have them welded on) in the appropriate spot and you are good to go. Unfortunately, this is not something we can do at this time.
What kind of trailer is this axle on?
Product Page this Question was Asked From
Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 7,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 7000 lbs
- Spindles Only
- 80 Inch Spring Center
- 95 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Shop: Mighty Cord 7-Way RV-Style Trailer Connector w/ Molded Cable - Trailer End - 6' Long
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 7,000 lbs
- Q&A: Rear Suspension Enhancement Recommendation for 2019 Freightliner M2 with Leaf Springs
- Q&A: Replacement 7,000 lbs Dexter Axle w/ 95" Hub Face and 80" Spring Seat
- Q&A: Can Arms of B and W Replacement Base for Companion Flatbed Fifth Wheel be Turned Around
- Q&A: Solution for Needing Replacement Dexter Axle with Number 7658660 Part Number
- Q&A: Replacement Axles for Trailer With 94 Inch Long 5,200 Pound Dexter Axles
- Q&A: Recommended Curt Helux Pin Box for a Rhino Bolt Pattern
- Q&A: How Much Does The B&W Companion 5th Wheel Hitch BWRVK3600 Weigh?
- Article: Double-Eye Trailer Suspension System Review
- Article: Trailer Wiring Diagrams
- Article: Hydraulic Trailer Brakes: How They Work & What to Buy
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Testing Trailer Brake Magnets for Proper Function
Lazer S.
8/7/2025
Hey Ryan, How did it go with the Dexter Trailer Axle Beam and the spring seats? Did you manage to get everything welded and working smoothly on your trailer? I'm curious to know because it could really help others facing a similar situation!