Will The Dexter Disc Brake Kit # K71-694-00 Work With The Hub # 008-416-92?
Updated 07/11/2025 | Published 07/09/2025
Products Featured in This Question
Question:
Hello, Will Part number K71-694-00 work with part number 008-416-92?
asked by: Ryan S
0
Expert Reply:
Hey Ryan,
The disc brake kit # K71-694-00 will in fact work with the hub and rotor # 008-416-92. With the same bolt pattern and axle rating these will work well. If you also need the right hand side you can go with # K71-695-00.
What kin of trailer are you replacing these on?
expert reply by:
Nick S
0
Product Page this Question was Asked From
Dexter 12-1/4" Hub-and-Rotor Assembly - Grease - 8 on 6-1/2 - E-Coat - 9/16" Bolts - 7K
- Trailer Hubs and Drums
- Hub with Rotor
- EZ Lube
- 25580 / 14125A
- Standard Grade
- For 7000 lbs Axles
- 9/16 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Recommended Replacement for a Lippert 289252 Control Module
- Q&A: Does The B&W Companion Require Additional Foot Pads Once Installed
- Q&A: Plastic Foot Pads Of B & W Companion Not Allowing The Post Pin To Engage
- Q&A: Typical Hanger Spacings for Tandem Axle Trailer with 3,500 lb Axles
- Q&A: Brake Controller Plug-and-Play Harness For 2020 Jeep Gladiator
- Q&A: How to Initially Adjust the Dexter Nev-R-Adjust Electric Trailer Brakes
- Q&A: Replacement Axle Components For Dexter D80 8,000LB Axle Under 2016 Landmark Orlando 5TH Wheel
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Top Gifts for Dads in 2024
- Article: Printable Trailer Bolt Hole Pattern Template
Ryan S.
7/11/2025
These are going on a 2024 ATC Toyhauler camper. Replacing the Hydrastar disc brakes that were put on in place of the electric drum brakes.