Weight Distribution Recommendation for NOBO 19.8 22' Trailer

Question

Question:

Looking for a WDH for towing a Nobo 19.8 22’ trailer length with a 2021 tundra. The trailer is about 4000 lb dry probably 6000 lb max loaded. Tongue weight is 400 - 500 Lb. Is there a specific hitch for this load range or would the blue ox 7500lb trailer weight and 750lb tongue weight hitch be the best product?

asked by: Eric H

0

Expert Reply:

Hey Eric, for that tongue weight range your best option is the Equal-i-zer part # EQ37060ET which has a wider range than the Blue Ox and is widely considered to be the king of weight distribution systems because of how well it works and how reliable it is. It also happens to cost less than the Blue Ox as well.

expert reply by: Jameson C

0

Jameson C.

8/7/2025

Hey Eric, how did the Equal-i-zer hitch work out for your towing setup with the Nobo trailer and Tundra? I'm curious to know if it met your needs, as it might help others in a similar situation.

Answer 1

Both the Fastway #FA94-00-0600 and the Equal-i-zer #EQ37060ET are rated for 600 pounds tongue weight which once your trailer is loaded and you factor in any weight in the back of your 2016 Chrysler Town and Country that is right where you want to be.…

view full answer...

Answer 2

I'm glad you trust us, and we can definitely help you out so you can enjoy your voyage instead of being understandably anxious about the sway. While there is always going to be at least a bit of sway, it should not be to the degree you were…

view full answer...

Answer 3

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Hello Barry, Since you already have a weight distribution (WD) hitch and are only experiencing a little rear sag, I recommend going with SumoSprings. I typically only suggest Timbrens for those who are towing heavy loads regularly, as they can create…

view full answer...

Answer 8

Hey David, I would test fit everything and see which orientation works best. With the spacer or without. Ideally when the kit is installed there will be 1 inch of space between the Timbren and the frame so whichever orientation gets closest to that…

view full answer...

Answer 9

Hey Mark! Weigh Safe does not offer a locking pin for the True Tow #WS94RR hitch ball. I'm sure the thinking behind it is that you're either towing with a trailer hooked up so the ball can't be removed, or you aren't towing and store…

view full answer...

Weight Distribution Recommendation for NOBO 19.8 22' Trailer

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching