Will The Curt Hitch C93MJ Fit A 2025 Nissan Murano?

Updated 07/16/2025 | Published 06/25/2025

Question:

I have a 2025 Nissan Murano. Does this hitch work? I heard that the new design in 2025 is a bit wider than the 2024.

asked by: Norberto L

Expert Reply:

Hi Norberto!

The Curt hitch # C93MJ is actually an updated hitch to accommodate for the slight change in the 2025 Nissan Moreno models. It will still fit models back to 2015 as well, but there will be no issues getting it installed on your 2025 now.

What are you planning on using the hitch for?

expert reply by: Lazer S

Curt Hitch Nissan Murano
(click to enlarge)

Norberto

7/15/2025

Hi Lazer, thanks for your answer. Could you confirm the measures? I found that some CURT hitches were built incorrectly. The distance between the outside edge of the left mounting flange and the outside edge of the right mounting flange should be 40.75in

Lazer S.

7/16/2025

@Norberto Looks like this is good to go. I measured 40-5/8" outside to outside and 38-1/2" from the center of the left bolt hole to the center of the right bolt hole. I will note that hitches can have the "arms" bend a little in shipping both to us and to you, so that could explain the issues you have found. The steel used to make the arms/brackets is a relatively "mild" steel that is designed to bend a little. If it didn't, it would break when the frame/body of the vehicle flexed over bumpy roads. As long as the arm/bracket isn't flexed/bent over too much (like, several inches), it can be bent back into place fairly easily.

Norberto

7/16/2025

@LazerS That's great, I just ordered it. Thank you!