What are Dimensions of etrailer RV Cover for Travel Trailers up to 22' e24VV

Question

Question:

What is the LxWxH of your RV Cover for Travel Trailers up to 22 Long - Gray as I need it to be at least 8.5 wide and at least 8.5 tall Thanks

asked by: Charlie

0

Expert Reply:

Hey Charlie, the etrailer storage cover part # e24VV that you referenced is 8 foot 6 inches wide by 9 foot 3 inch tall. The overall length is 22 feet. How long is your trailer?

expert reply by: Jameson C

0

Charlie

6/9/2025

Jameson Thanks for your answer, it clarified my question

Jameson C.

6/9/2025

@Charlie Glad to help!

Answer 1

Hey Laura, since we know your 2019 Venture Sonic Lite 169VUD travel trailer is 22 feet long the best RV storage cover would be the part #e24VV. Our fitguide for covers is based solely on the known length of the travel trailer so since we know yours…

view full answer...

Answer 2

The Adco SFS AquaShed Cover for Travel Trailer part #290-52241 would be an excellent option for a v-nose trailer up to 22' long. The material is breathable so there will be little chance for mold/mildew build-up and the triple layer top will stop…

view full answer...

Answer 3

Hey Doug, That's a good question because fit is really important so the cover stays snug on your trailer, and there is a specific way to measure for the etrailer covers. It's pretty simple, and what you want to do is measure the body of the…

view full answer...

Answer 4

I'm not seeing an HP model of the 2022 Forest River Cherokee Wolf Pup Travel Trailer so you'll need to confirm the length of your trailer. This can be done by measuring from the rear bumper to the front of the trailer body (pictured Below).…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 12

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

What are Dimensions of etrailer RV Cover for Travel Trailers up to 22' e24VV

Product Page this Question was Asked From

Continue Researching