What Bearing Kit do I Need for My 2019 Winnebago 1700bh with Lippert 3,500 Pound Axle?
Updated 09/12/2025 | Published 05/25/2025
Products Featured in This Question
Question:
Will this kit fit my Lippert 3500 lb axel in a 2019 winnebago 1700bh. I attached the tag on the axel.
asked by: Daniel
0
Axle tag on 2019 winnebago 1700bh
(click to enlarge)
(click to enlarge)
Expert Reply:
Hello Daniel,
Thank you so much for the picture of your axle tag.
Yes, the Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle # BK2-100 is the correct bearing kit. Don't forget to grab some LubriMatic Prime Guard High Temperature Wheel Bearing Grease - Red - 16-oz Can # L11380 if you do not already have some grease on hand.
Any big trips coming up? If so, where are you headed?
expert reply by:
Kate F
0
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams
- Q&A: Bearing Kit for 2017 Jayco Jay Flight 17BH
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Bearing Kit for Lippert 4,400 lb Trailer Axle
- Q&A: Replacement Bearing And Seals For UFP Hub H-1062-2
- Q&A: Replacement Hub/Rotor and Bearings for Tie Down Engineering TDE46245
- Q&A: What is the Best Grease for Trailer Bearings
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: How to Bleed Your Trailer Surge Brakes
Kate F.
9/12/2025
Hey Daniel, did the hub bearing kit fit your Winnebago as expected? I'd love to hear how it worked out for you, as it could give others confidence when ordering replacements.