What Grease Is Used In The etrailer Pre-Greased Hub AKIHUB-550-35-EZ-K?
Updated 09/29/2025 | Published 05/06/2025
Products Featured in This Question
Question:
AKIHUB-550-35-EZ-K What type of grease was used to pack the bearings on this item? And do you sell this type of grease? Also, is the washer included or I would have to reuse my existing washer?
asked by: Kevin E
0
Expert Reply:
Hello Kevin, thanks for reaching out. The grease used in the # AKIHUB-550-35-EZ-K hubs is a lithium grease. This is compatible with several different greases, but what I recommend is the LubriMatic LMX Industrial Strength Grease # L11390 which comes in a 14 oz. cartridge.
expert reply by:
Jesse M
0
LubriMatic LMX Industrial Strength Grease
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5 Inch
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Search Results: trailer bearing grease
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 5 - Pre-Greased
- Shop: LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear, 3-5/8" Center
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5-1/2 - Pre-Greased
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Q&A: Does it Matter Which Trailer Brake Assembly is Right and Which is Left
- Search Results: grease guns
- Search Results: grease
- Search Results: trailer tongue lock
- Search Results: tow straps
- Search Results: trailer bearing washer
- Search Results: spare tire mount
- Video: Detailed Breakdown of the Replacement Spindle Washer
- Video: Remove and Reinstall a Trailer Hub Review
- Q&A: Spindle Washer Compatibility With 1 Inch Spindle Without D-Shape
- Q&A: Method for removing and Installing Tang-Style Spindles Washers
- Video: Review of etrailer Trailer Bearings Races Seals Caps - Hub Bearing Kit 3500LB Axle - BK2-100
- Video: Step-By-Step Installation for the etrailer Hub Bearing Kit - Utility Trailer
- Video: Bearing Buddy Bearing Protectors: The Breakdown
- Video: Hands-On with the etrailer Hub Bearing Kit
- Q&A: Replacement Trailer Hub Assemblies For 3,500LB Axles Using L68149 Inner and L44649 Outer Bearings
- Q&A: Parts Needed To Switch a 3,500LB Axle To 5 on 5" Idler Hubs on 5X8 Utility Trailer
- Q&A: Torque Rating for Spindle Castle Nut
- Q&A: What are the Inner and Outer Diameters of the TruRyde Trailer Spindle Nut
Jesse M.
9/29/2025
Hey Kevin, did the LubriMatic LMX Industrial Strength Grease work well for your hub assembly? I'm asking because your experience might help others looking for the right grease for their hubs.