What is the Camber of Dexter 3,500 lb Trailer Axle
Updated 09/26/2025 | Published 04/28/2025 >
Question:
How much camber is in a Dexter 3500lb 95inch axle when new? My old ones have 1/4inch - 3/8inch at the center when the flatbed trailer is on the ground but unloaded, measured at the center. Are new ones more than that?
asked by: Mark B
0
Expert Reply:
Hey Mark, the camber that the Dexter 3,500 lb axles like the part # 7359765 have will be right at zero when the trailer is on the ground with the weight of it on the axle. If on the lighter end you might see -1.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 3500 lbs
- Spindles Only
- 80 Inch Spring Center
- 95 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Search Results: trailer hub tools
- Video: Hands-On with the Hub Saver Hub and Wheel Protector
- Search Results: motorcycle chock
- Search Results: gorilla lift
- Search Results: hydraulic remote
- Search Results: 51457
- Search Results: battery charger
- Search Results: 13392
- Shop: TecNiq PCP2 Side Marker Light - Amber LEDs - Clear Lens - Self-Ground
- Shop: Hub Saver Hub and Wheel Protector - Fits 4, 5, and 6-Lug Trailers - Qty 2
- Video: Review of Lippert Trailer Suspension Parts - Suspension Bolts - LC56RP
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: Brake Controller
- Shop: etrailer Ball Mount w/ Pre-Torqued 2-5/16" Ball - 2-1/2" Hitch - 2" Drop - 20,000 lbs
- Shop: etrailer Ball Mount w/ Pre-Torqued 2-5/16" Ball - 2-1/2" Hitch - 6" Drop - 20,000 lbs
- Video: Review of Terran Industries Trailer Leaf Springs - 5 Leaf Slipper Hook Spring 3.5K Axle - TX93RJ
- Video: Review of The Hub Saver Trailer Bearings Races Seals Caps - Hub Wheel Protector - HS79FR
- Shop: Lippert Trailer Suspension Wet Shoulder Bolt - 9/16" x 2-5/16" - Qty 4
- Shop: Lippert Replacement Standard Shackle Links - 3-1/8" Long - 0.224" Thick - Qty 4
- Shop: Lippert Trailer Suspension Wet Shoulder Bolt - 9/16" x 2-13/16" - Qty 4
- Q&A: Can Trailer Axle be Replaced with One that Has Longer Hub Face Length
- Q&A: How to Check for a Bent Trailer Axle Spindle
- Video: Complete Breakdown of the Bronze Bushing
- Video: Protect Your Bearings! Inside Look at Bearing Buddies with the Manufacturer
- Video: Bearing Buddy Bearing Protectors-BB1980A-SS Spec Review
- Q&A: Can the Add-On Roadmaster Comfort Ride Shock Kit Be Used On a Single Axle Trailer
- Article: Trailer Lighting Requirements
- Q&A: Torque Specs for Attaching Leaf Springs
- Q&A: Replacement Brake Shoes for 10 x 2-1/4" AxleTek Brakes


Jameson C.
9/26/2025
Hey Mark, did the information about the camber on the Dexter 3,500 lb axle help you decide if it was the right fit for your trailer? I'm curious to know if it worked out for you, as it could give others confidence when ordering replacements.