Availability of Replacement Sensors for Tire Linc Tire Pressure Sensor Kit

Question

Question:

Hello! We lost 2 tire linc sensors. FC8FBA-12. LCI 808506. Do you carry these? Thanks!

asked by: Dorene T

0

Expert Reply:

Hey Dorene, while we don't have the part numbers you mentioned we do have replacement tire pressure sensors for the Tire Linc system with the part # LC97VR.

expert reply by: Jameson C

0

Jameson C.

9/26/2025

Hey Dorene, did the replacement tire pressure sensors for the Tire Linc system work out for you? I'm curious to know because it could help others looking for similar solutions.

Answer 1

You sure can Patrick! The Tire Sensors for Tire Linc TPMS item #C34VV are exactly what you'll need. They include the nuts that secure the sensors to your valve stems. These are sold as a pair and work with the Tire Linc Pro TPMS for RVs and…

view full answer...

Answer 2

Hey Dave! The LCD Display for Tire Linc Pro RV TPMS #LC27VC only works with the Tire Linc Pro. What you can do is replace your existing Tire Linc with the Upgrade Kit for Older Tire Linc TPMS #LC59VC. This is compatible with the old sensors so you…

view full answer...

Answer 3

Hello CC, thanks for reaching out. Short answer, no, I wouldn’t mount it inside the battery box. The Tire Linc Pro Repeater #LC67VC is supposed to be mounted in a spot that’s as open and unobstructed as possible, ideally in a front compartment with…

view full answer...

Answer 4

You can absolutely get additional sensors to add onto the four that come with the Tire Linc TPMS for RVs and Trailers w/ Signal Booster - Bluetooth - 4 Tire Sensors #LC37VR. A single sensor by itself isn't sold, so you would need to get a pair,…

view full answer...

Answer 5

Hello Danny, Yes, it was a lovely Thanksgiving with family. Hope you enjoyed yours as well. We unfortunately do not sell just the pin portion. We do have one with a longer span, the etrailer Surge Brake Coupler Lock - 3-3/8" Span - 1/4"…

view full answer...

Answer 6

Hey Darin, this is a great question but since you have the Lippert Tire Linc Prep Kit that means you have everything but the sensors that mount on the valve stems and the repeater. So for that you'd just need the part #LC37VR which is a pair of…

view full answer...

Answer 7

Hello Jim, Great question. The Tire Linc Pro TPMS for RVs and Trailers - 4 Tire Sensors w/ Repeater #LC77VC uses a CR1632 battery. The Replacement CR1632 Batteries for TireMinder TPMS - Qty 6 #MRI-CR1632 will work perfectly and even gives you two…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Availability of Replacement Sensors for Tire Linc Tire Pressure Sensor Kit

Product Page this Question was Asked From

Continue Researching