How to Pick Out Bearing Buddy for Trailer Axle that Has Threaded Hub Bore
Published 03/18/2025
Products Featured in This Question
Question:
I have a 2022 DRV 5th wheel that has Morryde independent suspension, 9K axles and Kodiak trailer components. I would like to install a bearing buddy type fitting on my hubs. They are threaded. You sell the brakes and rotors, but for leaf springs. Do you sell an EZ lube that would fit
asked by: Gerald N
Expert Reply:
Hey Gerald, we have some larger Bearing Buddies that fit larger hub bores like the part # BB2717SS that would fit a hub bore of 2.717 inch but I don't believe this would be big enough as it normally is for between 5,200 and 7,000 lb rated axles.
But if you can get me the diameter of your hub bore I can see if we have an option.
Gerald N.
3/18/2025
Look at your part K2HR958QD11. Do you sell a bearing buddy for this ? Can you sell me one of the clear plastic threaded covers? I can see if the thread pattern is the same as mine.
Jameson C.
3/18/2025
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 11" Rotor - 8 on 6-1/2 - Dacromet - Leaf Spring - 10K Rockwell
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 8 on 6-1/2 Inch
- Hub and Rotor
- 5/8 Inch Studs
- 9000 lbs Axle
- 10000 lbs Axle
- 16-1/2 Inch Wheel
- 17-1/2 Inch Wheel
- Kodiak
more information >
Continue Researching
- Shop: Bearing Buddy Bearing Protectors - Model 2080T-SS - Threaded - Stainless Steel (Pair)
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Replacement Hub Solution for Dexter 8-155
- Q&A: Complete Disc Brake Conversion Kit For A Tandem 10,000 Pound Dexter Axle
- Q&A: Replacement For TDE LP75 Disc Brake Actuator
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Outside Dimensions Of The Replacement Left/Curb Side Leg for etrailer and Ram Hydraulic Jack e63VV
- Q&A: Torque Needed For Wheel on Kodiak Disc Brake Kit K2HR526D
- Q&A: Torque Specification for Lugs Nuts on 5/8-Inch Stud on Dexter Hub
- Q&A: Common Torque Specifications for Lug Nut Size
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Ram Trailer Tow Prep Package
Gerald N.
3/18/2025
According to Dexter, the inside diameter is 3 5/8”. On your web page it shows the clear plastic screw on dust cover on Kodiak rotors. That’s what I have but at above measurement