Will Fender Clearance Be an Issue if Replacing Axle with 4 inch Drop Axle on Trailer
Updated 10/30/2025 | Published 02/01/2025
Question:
Would there be a wheel to fender clearance if I replace the axle with the standard height axle? My trailer has the standard height axles on it.
asked by: Donnie
0
Expert Reply:
Hey Donnie, if you were to replace your standard axles with 4 inch drop axles like the part # E95SR that you referenced you'd lose 4 inches of fender clearance. Typically you want a minimum of 3 inches of fender clearance so you'd need to have at least 7 inches currently to go to the drop axle.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Trailer Axle w/ Electric Brakes - 4" Drop - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Spring Center
- 89 Inch Hub Face
- Drop - 4 Inch
- etrailer
more information >
Continue Researching
- Q&A: Replacing/Upgrading The Suspension On A 2007 Colorado Tandem Axle 5th Wheel With LRE Suspension
- Article: Trailer Wiring Diagrams
- Q&A: Air Force One Air Jumper Kit For Spartan K2 Chassis.
- Q&A: Trailer Hub Recommendation for Pace American 6 x 12 Trailer with Dexter Axle
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: How to Measure a Trailer Axle
- Q&A: How To Adjust Brakes On Trailer Axle w/ Electric Brakes 4 Drop - 3,500 lbs - 5 on 4-1/2
- Q&A: Replacement Axle for Lippert 3,500 lb Axle 95 inch Hub Face to Hub Face 80 inch Spring Seat
- Q&A: Does The Kenda Karrier KR53 ST205/75R15 Radial Trailer Tire Come Balanced?
- Q&A: Can You Balance The Tires Before Shipping Them
- Article: How to Measure for Trailer Hitch Drop
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
Jameson C.
10/30/2025
Hey Donnie, how did things work out after checking your fender clearance for the drop axle? Knowing whether the 4-inch drop left enough space could help others thinking about the same swap. Your update could make it easier for the next person with the same issue.