Do Equalizers of Dexter Equalizer Kit part # K71-448-00 Have 9/16 inch Diameter Bolt Holes

Question

Question:

Does this part K71-448-00 have 9/16” bolt holes?

asked by: Owen H

0

Expert Reply:

Hey Owen, the Dexter Equalizer Kit part # K71-448-00 that you referenced has bushing holes that are 9/16 inch in diameter for 9/16 inch diameter bolts. This actually comes with the correct size 9/16 inch bolts as well.

expert reply by: Jameson C

0

Jameson C.

11/3/2025

Hey Owen, how did the Dexter suspension kit work out with your trailer’s setup? Your update could make it easier for the next person checking bolt sizes for their equalizer kit.

Answer 1

The equalizers that come with the Dexter Heavy-Duty Suspension Kit #K71-448-00 have bolt holes that measure 6" apart on center and then 4" tall on center as you can see in the attached photo. You'll want to measure your current…

view full answer...

Answer 2

Excellent question, and the difference between the two kits comes down to the dimensions of the equalizers. What you will want to do is match up the size of your equalizer with the size of the equalizer in these kits. - 6" Long, 4" Tall…

view full answer...

Answer 3

Hey Eron, the equalizer part #K71-448-00 is 2 inches taller than the #K71-359-00 but since this only changes the height of half the leaf spring you'd end up only gaining 1 inch.

view full answer...

Answer 4

Hey Thomas, so we have the exact equalizer kit you are looking for with the part #K71-448-00. This comes with equalizers that match exactly with what you have now as well as heavy duty shackles that are also the same length and matching wet bolts and…

view full answer...

Answer 5

Hey Mike! Are you referring to the Dexter #K71-448-00? Adding a taller equalizer is possible but it won't raise the height of your overall trailer. You would also have to get longer hangers for the front and rear to match and raise the height. I…

view full answer...

Answer 6

Leaf spring hangers come in different heights to provide more or less clearance between the trailer body and the suspension. Manufacturers determine the best spacing for the axles and sizes of the hangers, leaf springs, equalizers, and shackle straps…

view full answer...

Answer 7

I don't have any information as to what leaf springs are on any one particular trailer such as a 2007 Jayco Jay Flight 29BHS but if they are double eye leaf springs which are the most common then we should have a Dexter Heavy-Duty Suspension Kit…

view full answer...

Answer 8

You are correct. The Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs #K71-448-00 you were looking at is 4" tall meaning it slightly will lift your trailer. These equalizers are slightly shorter at…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 12

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Do Equalizers of Dexter Equalizer Kit part # K71-448-00 Have 9/16 inch Diameter Bolt Holes

Product Page this Question was Asked From

Continue Researching