Replacement Spring/Reel Assembly for the Pace Edwards JackRabbit Tonneau Cover

Question

Question:

hello, I have a pace Edwards jackrabbit tonne. the mechanism under the cover is broken. the parts just under the lock. there are plastic parts and springs. is there a spare part fot this

asked by: Nickis N

0

Expert Reply:

Nickis, it sounds like you're looking for the Replacement Reel/ Spring Assembly for Pace Edwards Tonneau Covers # PE86RB which is going to be the replacement reel/spring assembly and will work for the SwitchBlade, UltraGroove, and JackRabbit tonneau covers.

expert reply by: Bryce D

0

Nickis

12/20/2024

hello, sounds great! Can you ship to Finland? Nickis Numelin, Brasaksentie 217, 06750 Tolkkinen, Finland, Europe

Reply

Bryce D.

12/23/2024

@Nickis Unfortunately no, currently, we ship only to the United States, Canada, Puerto Rico, the Virgin Islands, Guam, and FPO or APO addresses. Both the shipping and billing address must be an address in the United States, Canada, Puerto Rico, the Virgin Islands, Guam or a FPO or APO.

Reply

Answer 1

In order to bypass your factory installed controller and install an aftermarket brake controller like the Prodigy P3 Trailer Brake Controller, #90885, with Plug-In Wiring Adapter, #3016, you will have to make a couple of cuts and connections. First…

view full answer...

Answer 2

Hey Joseph, The replacement reel for your Full Metal JackRabbit cover is going to be the #PE86RB. This is the only replacement reel for the Full Metal JackRabbit Cover. Based on your model I reached out to Pace Edwards and they confirmed that this…

view full answer...

Answer 3

Hey William, so what you are describing sounds like two different kits installed on the Wrangler for flat towing. The braking solution which is the Invisibrake part #RM-8700 and the diode lighting kit that wires to the taillights. These are separate…

view full answer...

Answer 4

Hi Becky! Not sure why it isn't showing the P3, but the #TK28ER will fit your 2023 Jeep Grand Wagoneer Series II Obsidian. It also include the pigtail wiring harness that plugs right in. This plug is located under the dash to the left of the…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Hello Bill, Thank you for the information and the pictures, they are most helpful. Yes, the Kodiak Disc Brake Kit - 12" Rotor - 6 on 5-1/2 - Dacromet and Stainless Steel - 6,000 lbs #K2R526DS is a great replacement for your old Tie-Down…

view full answer...

Answer 7

Hey Mike! Yes, the #RM-910003-30 will work with your Nighthawk #RM-676 tow bar. In addition to the description you can see it listed in the actual Roadmaster instructions, see the attached photo.

view full answer...

Answer 8

Hey Chad, so we really cannot recommend using the Curt #C96JR (58964) with the Roadmaster Invisibrake #RM-8700. Like you said, the Invisibrake requires diodes in order for the unit to function properly. Instead, I recommend using Roadmaster Diode Kit…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Replacement Spring/Reel Assembly for the Pace Edwards JackRabbit Tonneau Cover

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching