Does Replacement Lippert Motor LC183058 Come with Instructions

Question

Question:

Does pn LC183058 come with installation instructions?

asked by: John G

0

Expert Reply:

Hey John, yes the Lippert replacement motor part # LC183058 that you referenced does come with install instructions.

expert reply by: Jameson C

0

Jameson C.

12/15/2025

Hey John, how did things go with the replacement motor for your Tread Lite steps? Your update could make it easier for the next person working on the same repair.

Answer 1

The exact step you have is the Lippert Electric Tread Lite Step for RV #LC353543. Since the motor and linkage of the step set can't be accessed from the bottom you'll have to un-bolt the steps to access the motor area and see what the issue…

view full answer...

Answer 2

Hello Tracy, We will definitely have some steps for you, but I do not have a database that supplies me what is put on what camper so you will need to take a couple of measurements to confirm the fitment. I tried to cross refence the part number…

view full answer...

Answer 3

When measuring the frame width of your 2008 Ford E-450 Sunseeker, you will measure from the outside of the frame. Since you measured an outside width of 42 inches on your Sunseeker, the Ultra-Fab Power Twin II Electric Stabilizer #UF39-941707…

view full answer...

Answer 4

Typically when you hear the clicking sound it is the motor #LC183058 or possibly the control module #LC334850. Since you have replaced these and the sensor #LC301694 the only other possibility is the wiring. Check your ground and make sure it is…

view full answer...

Answer 5

Sounds like the motor is bad then if the module and wiring is good. If the steps you have are the Lippert Tread Lites like part #LC353543 that you referenced the correct replacement motor would then be the #LC183058. If you have something else let me…

view full answer...

Answer 6

Yes the Replacement Motor for Lippert Tread Lite Powered RV Steps #LC183058 is a waterproof enough that if you drove in rain it would not start going in and out on you. For a Tread Lite step that is 23-7/8 inches wide we have the part #LC353543.

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

Hey Tim welcome back! Your ARH15AACBL2 GE AC unit has the old 410a refrigerant in it so the GE Appliances item #GE64FR you were looking at isn't going to work as a replacement. The EPA mandated R32 refrigerant has been used in all new AC's…

view full answer...

Answer 9

Hey Tom, great question! Both products provide an easy way to measure tongue weight, but they excel in different situations. The BTBRV Trailer Jack Foot Scale #BTBRV014 measures tongue weight at the trailer jack, so you don't need to position a…

view full answer...

Answer 10

Hi Jim; I'm sorry to say the GE Appliances Low-Profile RV AC #GE43ZR cannot be used to replace your Dometic Penguin II. I'm sure your existing AC is an old R410A unit. Everything switched to the new R32 refrigerant this year to follow the new…

view full answer...

Answer 11

Your 2019 Coachmen Mirada 32SS is built on a Ford F-53 chassis that has a 20,500 GVWR so for a rear sway bar you'd want the part #RM-1139-145 and then for a steering stabilizer part #RM-RBK22-RSSA that you also referenced. For a front sway bar…

view full answer...

Does Replacement Lippert Motor LC183058 Come with Instructions

Product Page this Question was Asked From

Continue Researching