Replacement Suspension Components For A 2024 Brinkley Model G 4000 5th Wheel Toy Hauler
Updated 12/15/2025 | Published 11/19/2024
Question:
I have a 2024 Brinkley Model G 4000 and I’m looking for a spare leaf spring and wet bolts. Do I need to contact Brinkley for the part numbers or do you guys know what they are. Thank you for your time
asked by: Josh J
Expert Reply:
Hey Josh,
There isn't a guide for us to see what Brinkley used when building your trailer so I would either need you to reach out to Brinkley or give us some measurements one the components you're needing replaced in order to pick out the correct replacements.
For the leaf springs you'll need to lift the trailer using the leveling system and let the suspension hang. You can then measure from the center of one eyelet to the center of the other eyelet.
For the wet bolts we need to know the length and thickness. Most of the time when replacing bolts you'll also replace the shackle straps. If you're wanting to have some extra shackle straps as well then we'll need to know the spacing from center of one hole to the center of the other hole (see diagram below).
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles - 24-7/8" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushings
- 8000 lbs
- 1-3/4 Inch Wide
- 7 Leaf
- 24-7/8 Inch Long
- Standard Grade
- Dexter
more information >
Continue Researching
- Search Results: trailer suspension parts
- Video: Feature Breakdown: Replacement Wet Shoulder Bolt
- Shop: Replacement Wet Shoulder Bolt - MORryde Suspension Upgrade Kits - 9/16" x 2-15/16" - Qty 1
- Shop: Replacement Wet Shoulder Bolt - MORryde Suspension Upgrade Kits - 9/16" x 3-3/8" - Qty 1
- Shop: Replacement Wet Shoulder Bolt - Equa-Flex Tandem Axle Suspension - 9/16" x 2-5/16" - Qty 1
- Shop: MORryde Rubber Suspension Upgrade for Triple Axle Trailers - 33" Wheelbase - 5.2K to 7K
- Shop: Dexter Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 38" Axle Spacing
- Shop: PopStep for MORryde StepAbove - 3 Step - 19-1/2" Treads
- Search Results: roadmaster trailer suspension parts
- Search Results: rv step covers
- Search Results: trailer brakes
- Shop: Dexter Bearing Kit for 7K Axles - Bearings 14125A/25580, Races 14276/25520, Seal 10-36
- Shop: Battery
- Shop: RV Jack Pads
- Search Results: etrailer trailer leaf springs
- Search Results: brinkley
- Search Results: 3100
- Q&A: Replacement Bearing Kit for 7K Dexter Axles 651773
- Video: Review of Pop Step RV Step Cover - PS47UR
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Article: How to Measure for Trailer Hitch Drop
- Shop: Suspension Enhancement
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Video: A Look at the Power Mountain Tallboy 6 Ton Off-Road Bottle Jack with a Military Cargo Trailer
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
on Trailer Leaf Springs
Kate F.
12/15/2025
Hey Josh, did you get a chance to measure the leaf spring and wet bolts on your Brinkley trailer? Once you have those numbers, it’ll be easier to match the right replacements. Let me know what you find—I’m here if you need a hand narrowing it down.