Will Muffler Have to Be Removed for Hitch Installation on 2006 Toyota Avalon XLS
Updated 12/15/2025 | Published 11/12/2024
Question:
When installing Draw-Tite hitch part 24870 on a 2006 Toyota Avalon XLS is it necessary to completely remove the mufflers or can they just be ped while supported as shown on later year 3rd generation Avalons? Thanks
asked by: Jim D
0
Expert Reply:
Hi Jim; according to the instructions for the # 24870 all you have to do is lower the muffler to install the hitch. Lowering it and supporting it with a strap will be adequate. However, if you're having trouble getting it into place with the available space after lowering it you could completely remove the muffler like we did in the older installation video.
expert reply by:
Robin H
0
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Are There Special Tools Needed to Install Draw Tite Hitch on 2007 Toyota Avalon
- Q&A: Is Loctite Required When Installing a Trailer Hitch
- Q&A: Is There Fascia Trimming Required to Install the Curt Hitch # C11427 on a 2011 Toyota Avalon
- Q&A: Which Hitch Receiver Size is Better 1-1/4 inch or 2 Inch
- Q&A: Which is Better for Highway Use 4.80-12 or 5.30-12 Trailer TIres
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Determining Trailer Tongue Weight
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: How to Install the Curt Stabilization Strap # 18050 to Carry a Bike Rack on a 2005 Toyota Avalon
Robin H.
12/15/2025
Hey Jim, how did things go with lowering the muffler when you installed the Draw-Tite hitch on your Avalon? Did supporting it with a strap give you enough room to work? Your update could make it easier for the next person doing the same install.