Replacement Cam Latches for NEO Enclosed Cargo Trailer
Updated 12/22/2025 | Published 10/11/2024
Products Featured in This Question
Question:
I have a NEO enclosed cargo trailer with a rear ramp door. The IMPERIAL cam latches on each side are rusting. No long bar, just a roll over latch. I need to find a replacement kit or a breakdown of the latch parts. Can you help?
asked by: Barry C
Helpful Expert Reply:
Hey Barry, thanks for the information and photos!
If looks like you'll need one of the following Cam-Action latches we carry from Polar, depending on what material you're wanting to use:
- Zinc Plated # PLR3057
- Aluminum # PLR1057-A
- Stainless Steel # PLR3057-SS
You'll just need a small length of 3/4" diameter pipe to physically fit the parts together on the hinge.
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Cam-Action Lockable Door Latch for Fold Down Trailer Gate or Side Door - Zinc Plated Steel
- Trailer Door Latch
- Reversible
- Cam-Action Latch
- Lock Not Included
- Bolt-On
- Zinc-Plated Steel
- Polar Hardware
more information >
Continue Researching
- Search Results: e5541h
- Search Results: 1403t3
- Search Results: ramp seal
- Search Results: ramp gate seal
- Search Results: l68149
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Search Results: axle
- Search Results: 2 speed jack
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Shop: Americana Aluminum Trailer Wheel - Split Spoke - 15" x 6" Rim - 5 on 4-1/2"
- Shop: Equalizer for 2" Wide Slipper Springs - 12" Long - 7/8" Center Hole
- Shop: Dexter 7-Leaf Slipper Spring w/ Hook End for 8,000-lb Trailer Axles - 26-5/8" Long
- Q&A: What is the Difference Between Grease Seal 58846 and Grease Seal 10-19?
- Shop: Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4" Tall - 9/16" Bolt Hole
- Q&A: How to Paint Galvanized CE Smith Single Axle Trailer Fender
- Q&A: Replacement Dexter 8-247 Wheel Hub
- Q&A: Spring Hanger and Axle Diameter Measurements for Installing Leaf Springs on Single Axle Trailer
- Q&A: Can Over-Under Axle Conversion Kit Be Used with New Axle
- Q&A: Hanger Kit Recommendation for Dexter 3.5K 4-Leaf Double-Eye Spring
- Q&A: Where Should Kodiak Disc Brake Calipers Be Mounted On A Trailer Axle?
- Article: Trailer Wiring Diagrams
- Article: How to Install E-Track in 3 Easy Steps
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: The Best Trailer Tongue Locks for Preventing Trailer Theft
- Article: What To Look For When Buying Ratchet Straps
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
Jerred H.
12/22/2025
Hey Barry, how did the new cam latch work out on your NEO trailer’s ramp door? It’d be great to hear if the fit and function matched what you needed. Your update could make it easier for others replacing similar latches.