How to Determine Correct Tail Lights For Ranger Trail Trailer
Updated 01/05/2026 | Published 09/09/2024
Question:
I am looking for a tail/turn/brake/backup led light with studs for a 2018 Ranger trail trailer. It is an odd shape light I cant seem to find. they say its built by optronics.
asked by: Mark S
Expert Reply:
Hi Mark,
We likely have an option for lights that fit your Ranger Trailer boat trailer, though I'm not privy to the exact lights on the trailer. In order to determine the right ones, however, you will simply need to measure your current tail lights and find the one that most closely matches your measurement.
For example, the Optronics LED Combination Trailer Tail Lights # TLL160RK are 8-1/16" long x 2-7/8" tall x 2-13/16" deep.
If you let me know what your light measures I would be happy to try and find the best replacement for you. I have also added a link to our entire selection of tail lights for you to check out, which you can filter by size once you measure your lights.
Product Page this Question was Asked From
Optronics LED Combination Trailer Tail Lights - Submersible - 40 Diodes - Driver and Passenger Side
- Trailer Lights
- Tail Lights
- Brake/Tail/Turn
- License Plate
- Marker
- Rectangle
- Surface Mount
- Submersible Lights
- LED Light
- 8L x 3W Inch
- Red
- Optronics
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Review of the UltraThin LED ID Light Bar for Trailers over 80" Wide
- Video: Performance Tool Crimping Pliers Review
- Video: Identification Light Bar for Trailers over 80" Wide Review
- Video: In-Depth Review of the Optronics Fleet LED Trailer Tail Lights w/ Grommets
- Video: In-Depth Review of the Plug
- Video: All You Need to Know About the Self-Tapping Screw
- Video: Detailed Breakdown of the Thinline LED Clearance and Side Marker Light
- Shop: Ring Terminal -16-14 Gauge - 1/4" Ring ID - Qty. 1
- Shop: Identification Light Bar for Trailers over 80" Wide - Submersible - 3 Diodes - Red Lens
- Shop: UltraThin ID Light Bar for Trailers over 80" Wide - Submersible - 3 Diodes - Red Lens
- Shop: Deka Heat Shrink Butt Connector - 12-10 Gauge - Nylon Insulation - Yellow - Qty 5
- Shop: Heat Gun - 572 to 932 Degrees - Dual Fan Speed - 12 Amp - 1,500 Watts
- Shop: Performance Tool Crimping Pliers - 10 to 22 AWG Wire - 9-1/2" Long
- Shop: Snap-Loc E-Track Self-Drilling Metal Screws - Qty 20
- Article: Trailer Lighting Requirements
- Article: Trailer Wiring Diagrams
- Q&A: Does Ducted Furrion Chill Cube With Heat Pump Include Remote
- Q&A: Are Bushings And Install Hardware Included With MORryde CRE3000 Equalizers?
- Q&A: Replacement Taillight Solution for Lens Number S2T216AP2
- Q&A: Best Replacement for a Wesbar Tail Light 271594
- Q&A: Do Thinline LED Clearance and Side Marker Lights Come With Bracket and Wiring
- Q&A: Bearing Kit for Lippert 4,400 lb Trailer Axle
- Q&A: Selecting The Correct Cushioned Equalizer and Wet Bolt Kit For a Grand Design 2800BH
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Measure a Trailer Axle
on Trailer Lights
Jesse M.
1/5/2026
Hey Mark, were you able to get the measurements for your Ranger Trailer tail lights? Once you have those, I can help narrow down the best Optronics LED option for your setup. Let me know what you find so we can match it up.