Replacing 24-1/4" Slipper Springs On A 4x6 Carry On Trailer
Updated 01/12/2026 | Published 09/03/2024
Question:
I have a 4x6 Carry-on trailer that i bought from Tractor Supply years ago. my slipper springs measure 24-1/4 from center eye to end, which is in spec with Carry -On direct replacement . Im looking for a softer ride because i never have anywhere close to that on the trailer. Will your 24-5/8 inch slipper spring work in this application , its slightly longer but rated well below what my 200 axle is rated for ? I assume its fine but wanted to ask before i order. My spring hangers measure like 22-1/2inch from the front hole center to the front face of the slipper bracket
asked by: JT
Expert Reply:
Hello JT, thanks for reaching out. Yes, the 24-5/8" long 3-Leaf Slipper Spring # e99SR will indeed work to replace your 24-1/4" long springs. When replacing leaf springs there is a small amount of tolerance, and a 3/8" difference is not going to throw off your suspension or anything. Just keep in mind these springs are for a 1,500 lb axle and each spring is rated for 750 lbs so please just be aware of this and make sure your don't overload the springs.
Product Page this Question was Asked From
3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles - 24-5/8" Long
- Trailer Leaf Springs
- Slipper Springs
- 9/16 Inch Eye
- Nylon Bushings
- 1500 lbs
- 1-3/4 Inch Wide
- 3 Leaf
- 24-5/8 Inch Long
- Standard Grade
- etrailer
more information >
Continue Researching
- Search Results: tow straps and recovery straps
- Search Results: battery switch
- Search Results: pulley
- Search Results: leaf spring
- Search Results: grease
- Search Results: hitch anti~rattle
- Search Results: bronze bushing trailer leaf springs
- Q&A: Installation of Slipper Spring with Open Eye End
- Q&A: Installing Leaf Springs on Single Axle Trailer
- Shop: etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers
- Shop: Brophy Stabilizer Bracket for 2" Hitch Receiver - Black Powder Coated Steel
- Shop: Erickson Tow Strap w/ Reinforced Loop Ends - 3" x 30' - 7,500 lbs Max Vehicle Weight
- Shop: Seaflo Battery Disconnect Switch with Key for Boats and RVs - 1,250 Amps
- Shop: etrailer Anti-Rattle Hitch Stabilizer for 2" Hitches - Vinyl Coated Steel
- Shop: LubriMatic Marine Trailer Wheel Bearing Grease - 3 oz. Cartridges - Qty 3
- Shop: Seaflo Battery Disconnect Switch for Boats and RVs - On/Off - 900 Amps
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: Measuring To Choose The Right Trailer Axle
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Video: A Look at the Power Mountain Tallboy 6 Ton Off-Road Bottle Jack with a Military Cargo Trailer
- Shop: Brake Controller
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
on Trailer Leaf Springs
Jesse M.
1/12/2026
Hey JT, how did the swap to the 24-5/8 inch slipper springs work out on your Carry-On trailer? Did they give you the softer ride you were hoping for? Your feedback could really help others trying to fine-tune their trailer suspension.