Tail Light Wiring Kit to Tow a 2007 Chevrolet HHR Behind a Class A Coach

Updated 05/21/2014 | Published 05/20/2014

Products Featured in This Question

Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 4-Way Flat Connectors

(3403)

$85.90

Hopkins Custom Tail Light Wiring Kit for Towed Vehicles

(28)

$71.13

Roadmaster FuseMaster Fuse Bypass Switch for Towed Vehicles - 20-Amp ATM Mini-Fuse

(367)

$79.02

Question:

2007 HHR I need a wiring harness so I can tow behind my Class A Coach. Would that be RN-154?

asked by: Bill B

Expert Reply:

The Roadmaster Universal Hy-Power Diode Wiring Kit, # RM-154, will work with your 2007 Chevrolet HHR. I have attached an installation video of this kit on a 2011 HHR for you to check out.

If you do not want to cut your vehicles tail light wiring, then you may be interested in the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles, # HM56100. I prefer this wiring harness because it has a simple plug-in installation. I have attached a few help articles on tow bar wiring for you to check out.

After doing some research on your HHR, it appears that Chevy recommends removing Fuse number 8 in the Floor Console Fuse Block when flat towing. This will prevent the battery from draining. In addition to the tail light wiring harness, I recommend installing the FuseMaster Fuse Bypass Switch, # RM76511. This will allow you to cut power to this fuse without having to remove it each time you want to tow.

expert reply by: John H