Will DeeMaxx Disc Brake Kit Fit 2022 ShoreLand'r YAV46TELWMS1-00
Updated 01/27/2026 | Published 08/24/2024
Products Featured in This Question
Question:
I have a shorelander boat trailer 2022 Model: YAV46TELWMS1-00 for my Yamaha SX210. Brake calipers recently seized corroded solid so looking to replace. We mostly launch in salt or brakish water. Will the DE42FR or DE62FR fit my trailer? Is the DE42FR adequate for launching in saltwater or should I pay the extra to get the DE62FR? Thanks Bruce
asked by: Bruce
Expert Reply:
Hello Bruce; I wasn't able to find out what kind of axle or bolt pattern you have on your 2022 ShoreLand'r YAV46TELWMS1-00 so you will need to identify it to see if these will fit. Both of these DeeMaxx Disc Brake Kits are designed to fit a standard 3,500 axle with idler hubs that have a 5 on 4-1/2 bolt pattern.
I would definitely choose the # DE62FR with stainless steel calipers over the # DE42FR since they will primarily be used for salt water applications. This will help prevent the issue you have now with your current calipers. However, even with the stainless steel I would make sure to give them a rinse with fresh water when you're finished.
Product Page this Question was Asked From
DeeMaxx Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 5 on 4-1/2 Inch
- Rotor
- 1/2 Inch Studs
- 3500 lbs Axle
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- DeeMaxx
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: lug nuts
- Search Results: brake pads
- Search Results: axle seal
- Search Results: shorlander
- Search Results: shorelander
- Shop: DeeMaxx Trailer Idler Hub for 3,500-lb Axles - 5 on 4-1/2 - Threaded - Galvanized
- Shop: Dexter Surge Brake Actuator - Disc - Elec Lockout - 2" Ball - Zinc - 7.5K - 3" x 5"
- Q&A: Recommended Disc Brake Hubs, Lines, and Hydraulic Actuator for a Boat Trailer w/a 3,500 lbs Axle
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Replacement Inner Member for Dexter DX7.5L Actuator - Tandem Axle w/ Disc - 2" Ball - 7,500 lbs
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet and KodaGuard - 3,500 lbs
- Shop: Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Galvanized Steel
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Q&A: How to Determine Correct Over-the-Hub Disc Brakes for Boat Trailer
- Q&A: Adding Oil Bath Hub and Converting Drum Brakes to Disc On 2021 Grand Design Imagine Travel Trailer
- Q&A: How To Find Correct Replacement Hubs for Skeeter SX2250 Trailer
- Q&A: Will the Additional Width from Slip-Over Rotors Affect the Fit of the Brake Calipers on a Trailer
- Q&A: What Are The Thicknesses Of The Kodiak 10 Inch Brake Rotor?
- Q&A: Cross Reference Chart for Kodiak Trailer Disk Brake Pads to Automotive Applications
- Search Results: brake line tee
- Search Results: trailer suspension parts
- Video: Review of Hydrastar Trailer Brakes - Single Axle Disc Brake Kit with Actuator - HYD62FR
- Video: Kodiak Disc Brake Caliper Review
- Video: Review of Hydrastar Trailer Brakes - Disc Brakes - HYD92FR
- Video: In-Depth Review of the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles
- Video: The Low-Down on the DeeMaxx Disc Brake Kit
- Video: Hands-On with the Dexter Premier Disc Brake Kit
- Video: Review of Dexter Trailer Hubs and Drums - Idler Hub - 8-259-50
Robin H.
1/27/2026
Hey Bruce, how did things go with the DeeMaxx disc brake kit for your ShoreLand’r trailer? Were you able to confirm your axle and bolt pattern and get the stainless steel setup working? Your update could make it easier for others who launch in saltwater too.