bing tracking image
Q & A Icon

Can I Add Additional Panels To The Go Power Solar AE-4 All Electric System?  

Updated 09/16/2024 | Published 08/23/2024

Question:

I have 2x200 watt GoPower panels now, I want to order the AE-4. Do I need more components to pair with my original 2? I am also looking at the GoPower 3000 watt sine wave inverter.

0

Expert Reply:

Hello David. The Go Power Solar AE-4 All Electric System with MPPT Solar Controller # 342-75010 is a full solar kit. So you can use it, and you will be replacing your current solar setup with the new controller, panels, remote ect...

This kit can work with up to 6 panels so you can use your current 2 as well as the 4 that come with the kit, provided there is room on your roof. If you already have the cables for your current panels, there is nothing else you need to buy separately.

The Go Power Industrial Pure Sine Wave Inverter - 3,000 Watt # 34278157 will work great with this setup.

expert reply by:
0
Jesse M
David E. profile picture

David E.

9/14/2024

Can you tell me if all 6 panels are wired the one existing connector pre installed on the roof???

Jesse M. profile picture
Etrailer Expert

Jesse M.

9/16/2024

@DavidE All of the panels included in the kit I mentioned are wired with the same connectors. I am not sure what connector is pre-wired on your roof, but as long as your plug is for Go Power brand panels you will be good to go.
David profile picture

David

9/16/2024

@JesseM I have the 400 watt overlander and need to know if the AE-4 can be connected parallel with the ov using MC4 connectors. These did not come in the kit so I would have to buy elsewhere.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>