bing tracking image
Q & A Icon

Replacement 4.8/4.00-8 Tire Recommendation for Small Sailboat Trailer  

Updated 01/19/2026 | Published 08/11/2024

Question:

Hello! Looking for Tires and Bearings. Tires: 4.8/4.00-8. Small sailboat, weighs 265 Lbs. Want to drive on highways, not to exceed 65 MPH. Donating this boat and trailer, so I dont want to sell the farm, but I want it to be safe. What would you recommend? Old tires have been removed from the rims. Will replace stems as well. Bearings: Spindle is tapered Shoulder taper. Inner bearing has inner diameter of 1 1/16. Has markings as follows: Tyson L44649. Outer bearing has inner diameter of 11/16. Timken LM 11749 Do you have a mixed size bearing kit for 2 inner and 2 outer, seals cotter pins andDust caps? Please let me know if you need additional info. Best Regards

0

Expert Reply:

Hey Patrick, thanks for reaching out!

I recommend picking up the Kenda K371 Bias Trailer Tire # AM10004 and using the Americana High Pressure Rubber Snap-In Valve Stem # AM20907 for your wheels. This tire has a 65 mph speed rating and can be inflated up to 90 psi which is why you'll need the high pressure valve stem.

As for the bearings, we have the # L44649, but we don't have the LM11749. To replace the seals and dust caps though I'll need you to take some measurements of the seals (inner and outer diameters) and the diameter of your hub bore where the dust caps install so I can make the correct replacement recommendations.

expert reply by:
0
Jon G
Josh B. profile picture
Etrailer Expert

Josh B.

1/19/2026

Hey Patrick, how did the Kenda K371 tires and high-pressure valve stems work out for your sailboat trailer? Once you measured the seals and hub bore, were you able to find the right replacements for the bearings and dust caps? Your update could make it easier for others working on similar small trailers.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>