Trailer Wiring Recommendation for a 2025 Mazda CX-70

Question

Question:

I need a 4 or 5 pin flat trailer wiring for a 2025 Mazda CX70. What do you recommend?

asked by: Chuck R

0

Expert Reply:

Hey Chuck, thanks for reaching out!

I recommend going with the Curt T-Connector Vehicle Wiring Harness # C24ZV for your 2025 Mazda CX-70 because it's a simple Tee-in installation so it's much more simple than getting in behind your tail lights and splicing into your OEM wiring.

If you then wanted to add a 5-Way you would need the Kit # 20036 which requires you to splice that blue wire into your reverse light function.

Attached is an installation video for your reference!

expert reply by: Jon G

0

Answer 1

The Curt #C59236 wiring you've found for your 2024 Mazda CX-90 is a universal wiring kit that essentially fits any vehicle on the market since it requires splicing into the OEM wiring of the vehicle for the installation. The Curt 56494, which is…

view full answer...

Answer 2

Hello Donald. For towing you never want to go over what is recommended in your owners manual. It all depends on the hitch that you have on the vehicle. Some of them can be rated for a higher tongue weight when using a weight distribution system, but…

view full answer...

Answer 3

Since the Curt 4-way kit part #C24ZV plugs into the factory trailer wiring port it would put the vehicle into trailer mode when towing a trailer like you are wanting it to.

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

John, the Curt Trailer Hitch Receiver #C25FV will fit all of the models of the 2024 Mazda CX-90, including the PHEV.

view full answer...

Answer 6

Hey Vince congrats on the new vehicle! To tow a trailer with your 2025 Mazda CX-70 you're going to need a hitch, a wiring harness, a couple of mounting brackets, and a ball mount kit. The best hitch for your CX-70 is going to be the Curt item…

view full answer...

Answer 7

Hey Danny, thanks for reaching out! I recommend using the Curt Echo Under-Dash Bluetooth Brake Controller #C27JR which will plug into your 2024 Mazda CX-50 using the Adapter #C32FV as long as your CX-50 has the factory tow package. I really like this…

view full answer...

Answer 8

The Tekonsha Voyager Proportional Trailer Brake Controller #39510 will install in a 2002 GMC Sierra (if it is equipped with a factory 7-way) using quick-connect wiring adapter #3025-P, which plugs in under the dash as shown in the linked video at the…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Trailer Wiring Recommendation for a 2025 Mazda CX-70

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching