Is There Curt Front Hitch that Fits 2018 Ram 2500 Power Wagon

Question

Question:

Will this work on 20018 Ram 2500 Power Wagon? The Power Wagon comes with a front winch. Thank you Guy

asked by: Guy E

0

Expert Reply:

Hey Guy, we have a Curt front hitch that fits your 2018 Ram 2500 Power Wagon with the part # C31015 but the part number you mentioned is for RV bumpers. See attached picture.

expert reply by: Jameson C

0

Power Wagon Front Hitch
(click to enlarge)

Jameson C.

2/3/2026

Hey Guy, how did the Curt front hitch end up working on your Power Wagon with the front winch? Your update could make it easier for others with the same setup.

Answer 1

Due to the winch's fairlead being built into the main winch mount on your 2017 Ram 2500 Power Wagon it appears the only front mounted receiver you can use is the Curt #C31015 since it will mount below the bumper. The EcoHitch #306-X7900 would hit…

view full answer...

Answer 2

The installation instructions for the Curt Front Mount Trailer Hitch #C31015 does state to remove/loosen up both the top and bottom nuts on each side of the truck. The bottom nuts definitely needs to be removed as they will be replaced by the…

view full answer...

Answer 3

The Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" #C31015 is a confirmed fit for your 2017 Ram Power Wagon as well. It is a confirmed fit for all 2010 to 2018 Ram 2500 models with 4 Wheel Drive like your Power Wagon.

view full answer...

Answer 4

The Curt Front Mount Trailer Hitch Receiver #C31015 will fit your 2017 Ram 2500 Power Wagon. I have included an image below of this receiver installed on a Power Wagon so you will be able to see how it will fit. It mounts below the winch so you will…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Is There Curt Front Hitch that Fits 2018 Ram 2500 Power Wagon

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching