Replacement Axle for 1956 Dutton-Lainson Trailer
Updated 02/03/2026 | Published 07/19/2024
Products Featured in This Question
Question:
I have used your trailer hub kits for years and now want to also use them on a 1956 Dutton-Lainson coil-spring-type trailer, with VERY strange spindles. I was planning on getting a new axle but, now that its torn down, I think I might be over-thinking it. To whom could I send photos / dimensions?
asked by: Mark J
Expert Reply:
Hi Mark; it looks like you may have already sorted this out since you bought the # TRU59FR replacement spindle. Assuming this is a 2k axle that is the best option aside from replacement. You can still send me your pictures but based on the age and your description I'm 99% sure it is an old outdated spindle nothing would fit. If the axle appears to be in good shape by all means swap out the spindle, otherwise it is probably a good idea to replace it completely like you originally thought.
Product Page this Question was Asked From
Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 3500 lbs
- Spindles Only
- 74 Inch Spring Center
- 89 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Shop: BT8 Spindle for 2,000-lb Trailer Axles - 1-3/8" Diameter
- Shop: Yates Spool Roller for Boat Trailers - TPR - 5" Long - 1/2" Shaft
- Q&A: Availability of Trailer Hub to Fit Older Short Spindle on Boat Trailer
- Search Results: tru94fr
- Search Results: bt8 spindles
- Q&A: Proper Way to Tighten Trailer Spindle of Castle Nut
- Video: Cleaning and Replacing Hubs and Bearings
- Video: An In-Depth Look at the CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles
- Video: What to Know About the etrailer Boat Trailer Jack w/ Wheel
- Article: How to Raise Your Travel Trailer Height
- Article: How to Measure a Trailer Axle
- Q&A: How to Determine Correct Hub Replacement for 1994 Jayco Eagle SD with Dexter Axle
- Q&A: Do I Need Additional Fuses for the Main Fuse Box on a 2024 Honda Pilot to Power a Wiring Harness?
- Q&A: Is there a Brake Mounting Flange for a Square 3500 Pound Trailer Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: How to Measure Trailer Leaf Spring to Find Correct Replacement
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: How to Splice in Replacement 4-Way Trailer End Connector
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
Robin H.
2/3/2026
Hi Mark, how did things go with the replacement spindle on your Dutton-Lainson trailer? Did swapping it out solve the fit issue with those unusual spindles? Your update could make it easier for others working on older trailers like yours.