bing tracking image
Q & A Icon

Recommended Flat Towing Parts for a 2024 Chevy Colorado Trail Boss  

Updated 07/22/2024 | Published 07/10/2024

Question:

What do I need to flat tow a 2024 Chevy Colorado trail boss. A complete setup. Thank you

0

Expert Reply:

To flat tow your 2024 Chevy Colorado Trail Boss you will need the following parts:

Tow Bar and Safety Chains - Roadmaster Falcon 2 Tow Bar item # RM-520 and item # RM-643

Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable Arms item # RM28GR

Battery Disconnect - Roadmaster Battery Disconnect with Switch item # RM-766

Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267

Supplemental Braking System - SMI Stay-IN-Play DUO Supplemental Braking System item # SM99251 or item # SM99243 if your motorhome has air brakes

High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. I have linked a FAQ article that explains all this in more detail along with our selection of adapters.

expert reply by:
0
Jerred H
Mark S. profile picture

Mark S.

7/22/2024

Jeered Can I use the etrailer xhd non-binding tow bar part number e84ZR with the base plate kit you have listed and the rest of the stuff rather then the 6000 lb one listed? Thanks. Mark Sabol

Jerred H. profile picture
Etrailer Expert

Jerred H.

7/22/2024

@MarkS You sure can! The etrailer XHD Non-Binding Tow Bar item # e84ZR is specifically designed to work with Roadmaster Direct-Connect Base Plates like item # RM28GR. It includes safety chains too.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>