Availability Of 3,500 lb Rated Overslung Axle
Updated 02/03/2026 | Published 07/09/2024
Products Featured in This Question
Question:
I am looking for two Over Slung 4 inch axle 3500 lb. 75 inches from fastening plate to fastening plate., 89 inches from brake plate to break plate. A l I see is Dexter under slung axles, is that all you offer? Thanks Randy
asked by: Randall F
Expert Reply:
Hello Randy, thanks for reaching out. You are correct that all of the axles we offer are underslung. For example the Dexter Trailer Axle Beam # T3584F-EZ-8974 is 89" long and has 4" between the spring seats. So this will be our closest option to the specs you provided. To flip the axle you can use the Dexter Over-Under Conversion Kit # K71-384-00.
Product Page this Question was Asked From
Trailer Axle with Idler Hubs - 4" Drop - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Spring Center
- 89 Inch Hub Face
- Drop - 4 Inch
- etrailer
more information >
Continue Researching
- Q&A: Will Air Lift LoadLifter 5000 Air Helper Springs AL38FF Fit 2022 Ford Bronco With Sasquatch Package?
- Q&A: Replacement Hub/Drum and Bearings for 2006 Carmate Trailer With Dexter 8-247 Assembly
- Q&A: Do You Have a 2-inch Square Axle Rated for At Least 3,000lbs and Has Idler Hubs?
- Q&A: Can The etrailer Trailer Axle with Idler Hubs # e65GR Be Mounted Below the Leaf Springs?
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Recommended Slider Base and Ram Puck System Adapter for a Curt A20 5th Wheel Hitch Head
- Article: How to Measure a Trailer Axle
- Q&A: Replacement Spindle For Jet Ski Trailer With 2,700 lb Capacity
- Q&A: Are Powder Coat Trailer Wheels Good for a Saltwater Boat Trailer ST205/75R14
- Article: Trailer Wiring Diagrams
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Lighting Requirements
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Aftermarket Brake Control Wiring for 07-13 GM Full-Size Truck with Factory-Integrated Brake Control
Jesse M.
2/3/2026
Hey Randy, did the Dexter axle and over-under conversion kit work out for your trailer setup? Knowing how that combination fit could help others trying to match similar axle specs.