Info Needed to Pick Out Replacement Axle for 1946 Bantam T3 Trailer
Updated 02/03/2026 | Published 06/28/2024
Question:
I own two 1946 Bantam T3-C trailer. Id like to change the wheel hubs to accommodate Jeep wheel/tire. 5x4.5 bolt pattern. Im even willing to change the axles to make this work. Is there a wheel hub conversion kit or can you point to the axle and hub assembly solution? Im converting the trailers for over-landing pop up tent, etc.. Thanks.
asked by: David C
Expert Reply:
Hey David, so what you'll need to do is replace the axle on your trailer which to do that you'll need to know the axle capacity needed and the distance between the spring seats on the current axle as well as distance from hub face to hub face. For a 5 on 4-1/2 inch bolt pattern you'll most likely need between a 2k or a 3,500 axle.
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle - 4" Lift - 5 Bolt - 3.5K
- Trailer Axles
- Rubber Spring Suspension
- Standard Grade
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Timbren Axle-Less Trailer Suspension Compatibility with Jeep 5 on 5 Bolt Pattern
- Q&A: What Is The Difference Between Timbren xle-Less Trailer Suspension T54KV And TASR5200S03?
- Q&A: Difference Between Timbren Axless Suspension Systems T54KV and T99GR
- Q&A: What Hub/Drums Are Recommended for Timbren 3,500 lb Axle Less System
- Q&A: Electric Brakes with Parking Brake Feature for Timbren 3.5K 4" Lift Axle-Less System
- Q&A: Recommendations For Upgrading to Timbren Heavy Duty Axle-Less Trailer Suspension
- Q&A: What Parts Do I Need to Install the Timbren Axle-Less Trailer Suspension # T99GR?
- Article: Where to Position the Trailer Axle?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Raise Your Travel Trailer Height
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps
Jameson C.
2/3/2026
Hey David, did you get a chance to measure the axle capacity and hub face distance on your Bantam trailer? Once you had those numbers, were you able to find an axle that fits the 5 on 4-1/2 bolt pattern you wanted? Your update could make it easier for others working on similar trailer conversions.